pad question

[imported_bored7one4]

I have a PC with 6inch backing plate for 6.5 inch pads. I just purchase the meg w-64 5 inch rotary backing plate for my dewalt. If i get new 6.5 inch LC pads i can use it on both the PC and rotary right? the reason i ask i didnt see any 6.5 inch pads under the rotary pad section on autogeek. just wanted to make sure before i buy.



thansk

[imported_bored7one4]

CCS 6.5 inch foam pads, Lake country ccs foam pads, porter cable pads, ccs polishing pads, ccs pads, lake country ccs pads (http://autogeek.net/lc-ccs-6inch-pads.html)



can these pad be use with 5inch Meg rotary backing plate?

[imported_bored7one4]

bump? anyone?

[Thomas Dekany]

yes they can be use with either a pc or rotary

[Legacy]

The 6.5" pads for pc will have little to no correcting power. The pad is too big and heavy for the pc. You can use it to wax.

[Thomas Dekany]

The 6.5" pads for pc will have little to no correcting power. The pad is too big and heavy for the pc. You can use it to wax.



those rock hard orange pads as well as the yellow pads will correct.

[imported_bored7one4]

What size pads does most detailers use for a rotary anyways?

[Thomas Dekany]

What size pads does most detailers use for a rotary anyways?





Between 5 and 6.5??

[imported_bored7one4]

is there an advantage in using bigger pads? ie.. 7 or 8 inch pads?

[Legacy]

is there an advantage in using bigger pads? ie.. 7 or 8 inch pads?

They will get hotter.