imported_Totoland Mach
11-25-2008, 05:25 PM
This beauty was one of the scratchiest cars I`ve done! And, the clear coat was hard as heck. Compounding didn`t seem to work the scratches out, so I used 3M Trizact 3000 pads on the air orbital. Whoa....I ended up using 4 pads on this car (to the tune of $32 in Trizact pads).
Here`s a sampling of the finish I started with:
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/05745iStartRearBumper.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/05745iStartFenderPanel.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/05745iStartRearBumperBelowTrunk.jpg
Wetsanding and partial compounding
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/05745iWetSandremovalPsngrSide.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/05745iWetSandremovalPsngrSide2.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/05745iCompoundHalfRearBumper.jpg
And...just when you think you are done, an alcohol wipedown reveals some leftover sanding haze...grrrrrrrrrrrrr.
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/05745iIPAwipeDownPsngrSide2.jpg
So, a couple of "do-over`s" later, I finished the sides
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/05745iCompoundDriverSideCompleted.jpg
After compounding with wool and foam, I used Menzerna 106FA as a polish
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/Black745iMenzernaFinished.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/Black745iMenzernaOnHood.jpg
I power washed between each step: First to remove any compound and polish dusting and Second to check for any wetsanding haze I missed. I did find a few places and re-compounded those areas
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/Black745iWaitingForWaxToDry.jpg
Finally, I applied a heavy coat of Meguiar`s #26 and left it on the car overnight. Today, I powerwashed the car with the wax still on the surface and used some new Cobra plush towels to dry/remove the wax.
The car is now ready for a new owner!
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/Black745iOffLiftFinished.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/Black745iOffLiftFinished2.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/Black745iOutsideFinished.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/Black745iOutsideFinished2.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/Black745iOutsideFinished3.jpg
Now, I`ve only got 3 more Black Bimmers to start on.....
Toto
Here`s a sampling of the finish I started with:
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/05745iStartRearBumper.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/05745iStartFenderPanel.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/05745iStartRearBumperBelowTrunk.jpg
Wetsanding and partial compounding
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/05745iWetSandremovalPsngrSide.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/05745iWetSandremovalPsngrSide2.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/05745iCompoundHalfRearBumper.jpg
And...just when you think you are done, an alcohol wipedown reveals some leftover sanding haze...grrrrrrrrrrrrr.
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/05745iIPAwipeDownPsngrSide2.jpg
So, a couple of "do-over`s" later, I finished the sides
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/05745iCompoundDriverSideCompleted.jpg
After compounding with wool and foam, I used Menzerna 106FA as a polish
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/Black745iMenzernaFinished.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/Black745iMenzernaOnHood.jpg
I power washed between each step: First to remove any compound and polish dusting and Second to check for any wetsanding haze I missed. I did find a few places and re-compounded those areas
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/Black745iWaitingForWaxToDry.jpg
Finally, I applied a heavy coat of Meguiar`s #26 and left it on the car overnight. Today, I powerwashed the car with the wax still on the surface and used some new Cobra plush towels to dry/remove the wax.
The car is now ready for a new owner!
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/Black745iOffLiftFinished.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/Black745iOffLiftFinished2.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/Black745iOutsideFinished.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/Black745iOutsideFinished2.jpg
http://i121.photobucket.com/albums/o212/Totoland/05%20745i%20Black%20WetSanded/Black745iOutsideFinished3.jpg
Now, I`ve only got 3 more Black Bimmers to start on.....
Toto