springer1521
08-27-2008, 08:46 PM
Is it ok to put M26 and then a coat Collinite 845 over it?
Is there other combos that would work better?
Sorry first post on here.
dublifecrisis
08-27-2008, 08:57 PM
there are surely other combos that would work better. By that I mean as far as durability and looks. Sorry, I`ve never used either of those as I`m just an amateur. Try it and see. How long ago was the M26 applied or has it not been done yet? I wouldn`t apply the 845 immediately after the Meg`s but perhaps 12-24 hours apart would be fine.
Accumulator
08-28-2008, 10:29 AM
springer1521- Welcome to Autopia!
Never tried that combo, but I can think of two potential issues (dunno if either will happen though): 1) the solvents in the 845 might compromise the #26, 2) the high oil content of the #26 might cause issues with the 845 bonding.
All-in-all, I`d choose one or the other. Generally the last product gives the looks and these are two rather different looking waxes; I suspect you`ll like one or the other better.
The #26 will probably give a deeper/richer look, but the 845 will look brighter/more reflective. The 845 will bead and last a lot better.
You might consider applying the 845, see how you like the look, and then apply the #26 to see if you like that better. Then you could refresh the #26 from time to time while the 845 will continue to maintain a good protective base layer.
springer1521
08-28-2008, 03:55 PM
Ok. Thank you guys so much for the help :)