View Full Version : TOL foam wool vs AutoGeek foam wool
Evenflow
06-05-2008, 04:13 PM
Ok, what in the world is the difference between the TOL purple foam wool pad, and the AG purple foam wool pad.
Supposedly AG`s is 1" thick, and TOL is 3/4" thick. Is it going to make a huge difference?
bwalker25
06-05-2008, 04:24 PM
they are from the same manufacturer so they should be the same :) just a typo on someones part on either website :)
DinoV
06-05-2008, 04:45 PM
Actually, on the Lake Country web site, there is a 3/4" and 1" available. So it may not be a typo.
imported_Denzil
06-05-2008, 05:33 PM
Check Lake Country (http://www.lakecountrymfg.com/foamedwoolpads.html) again.
abbeysdad
06-05-2008, 07:28 PM
Hmm...is the foam wool pad better than just foam? Or would you just use wool (or the foam wool) for really tough corrections?
wannafbody
06-05-2008, 07:44 PM
Foamed wool is for cutting with a compound. It`s more efective than foam-and safer on edges and ridges.
Junebug
06-06-2008, 11:22 AM
I`ve order these pads from AG and TOL, there is no difference in the pad, however, TOL is 4 bucks cheaper than AG per pad, even with the 3 pac or 6 pack deals from AG, TOL is still cheaper. I just verified this before posting.
abbeysdad
06-06-2008, 11:48 AM
Foamed wool is for cutting with a compound. It`s more efective than foam-and safer on edges and ridges.
Are you using it with a PC or a rotary?
gmblack3
06-06-2008, 12:32 PM
Do you guys think the shorter nap would give more bit as the nap will not lay down as much?