Ultrafina - non-rotary use?

[drew.haynes]

I plan to get a rotary later this summer, but in the meantime, can ultrafina be effectively broken down with just a porter cable? If so, what pad should I use, as I`ve heard the US only receives the 8" version of the 3m blue (is that right?)?

[imported_weekendwarrior]

"epbcivicsi" uses it with a white pad on the PC I believe.



Yeah, you only get the 8" pad in the US, but I use it with a grey/black LC pad sometimes, and get good results.

[KnuckleBuckett]

I white padded it for my Flex and was SUPER impressed!

[Mindflux]

Yeah, you only get the 8" pad in the US, but I use it with a grey/black LC pad sometimes, and get good results.





Scottwax gets the 6" from his local distributor in Dallas no problem.

[imported_Dave1]

I plan to get a rotary later this summer, but in the meantime, can ultrafina be effectively broken down with just a porter cable? If so, what pad should I use, as I`ve heard the US only receives the 8" version of the 3m blue (is that right?)?



3M makes a black/gray finishing waffle pad that`s almost as soft as their blue UF version. It`s available in 5 1/4" and makes an excellent combo for Ultrafina......

[NSXTASY]

Ive used UF SE with my PC and both a 5" Blue LC/5" Gray LC

[imported_shine]

Shouldn`t about any polish work with a DA? Its just that the results are always a bit more impressive if done by rotary, right?

[imported_Denzil]

IIRC, Supe claims that the Edge red foam finishing pad is just as soft as the 3M blue foam waffled pad.

[scary bill]

UF does fine by PC. I use a LC 6.5" blue pad by PC or rotary with great results.