pingable
05-10-2008, 03:08 PM
I`ve gone to a Brembo GT 8 pot caliper and there is not alot of manufacters sofar in my research that make a lower dusting pad that fits the 8 pot caliper. Hawk HPS (my street pad of choice) will fit for my rear 4 pot caliper but not the fronts.
So for now....I`ll be running very VERY Dusty pads.
Quick test shows that with less than 3 days of use, and just a quick spray with APC 4:1 with no agitation, and a strong rinse is not going to cut it at all.
The inner barrels are completely dirty with brake dust already.
I do plan routine wise to probably do the inner barrels every 2 weeks with the powersticks . However, the wheels are most definitely going to need a more frequent cleaning regimen.
For those in similar situations, what would be your wheel cleaner of choice ? Have to do a little research on very mild-mild acid based cleaners I would consider using ....on a daily basis.
So for now....I`ll be running very VERY Dusty pads.
Quick test shows that with less than 3 days of use, and just a quick spray with APC 4:1 with no agitation, and a strong rinse is not going to cut it at all.
The inner barrels are completely dirty with brake dust already.
I do plan routine wise to probably do the inner barrels every 2 weeks with the powersticks . However, the wheels are most definitely going to need a more frequent cleaning regimen.
For those in similar situations, what would be your wheel cleaner of choice ? Have to do a little research on very mild-mild acid based cleaners I would consider using ....on a daily basis.