Pink Wax pad ?

[ramhunter24]

I just finished doing my Brilliant Black 300C with 106FF with a LC Orange Pad. IT did an awesome job and the flakes are very visiable.



My questions is that I now need to put on LSP I am thinking of putting on PinkWax (ScottWax combo), what pad should I use with my PC 7424.. I have both a Red & Black LC pad or should I do this by hand?



Or should I be putting on another product that will make the flakes really pop and look wet?



If I should be doing this with the PC7424 what speed would you recommend?



Thank you in advance..

[BigJimZ28]

1.) the combo of VM + RMG is called Pink Moose

(pink wax is a Finish Kare LSP)



2.) the combo is not a LSP it is final polish/glaze(pre LSP)

[ramhunter24]

Loosing my mind. Its been a long day with the PC did wifes Durango and my car..



Yes Pink Moose is what I was referring to. What recommendations should I look at after I put down the Pink Moose.



With the Pink Moose what Pad should I be using LC red or black or should this be done by hand... If I can do this with PC7424 what speed should I be using..



Thanks for correcting me, don`t want to confuse everyone.

[BigJimZ28]

for the pink moose use a light polishing pad

on the PC @ speed 4-5 till it "melts into the paint"



but if you did a final polish just use the RMG on a finishing pad on speed 3-4

[ramhunter24]

Thanks BigJimZ28.



Since I just finished with the 106FF and looks good, should I just go straight to the RMG with a PAD? Or is the PinkMoose just adding another step that is not needed?