Collinite 845/ please get off

[edenward]

Well like an idiot i applied in the direct Florida Sun, and now I can`t get the shi* off. Please help, of course I applied to thick also. It`s been 24 hours and this stuff is like iron. Please any help would be appreciated.

[jshillin]

Man, you have to apply 845 super thing... I`ve never let it sit that long either. I`d try a QD first, if that doesn`t do anything then I`d try a warm/hot, damp MF.

[Eliot Ness]

Try a QD or just rewash it.

[pingable]

interesting read....with the advent/availability of more citrus washes on the market, will a heavy citrus wash/soak remove or at least soften the hardened wax up ?



edenward.....home depot has zep citrius cleaner.



Maybe a pro will chime in and know if something like that will cut it.

[edenward]

Thanks guys I`ve tried a QD and no such luck, it`s still on, and hard as he**

[jshillin]

Try washing it with HOT water then

[2KLS1]

How about polishing it off with a mild polish or using a paint cleaner.

[pingable]

don`t do the polish.....it`s probably somewhat abrasive with the hardened wax



Just thinking outloud......as there is some solvents in 845. take a small spot and try to rewax it ??? Do that area soften up .....drawing straws here

[edenward]

I tried using a QD with a porta cable at 6, and didn`t touch it . My car is Metalic green, and a Supra daily driver.

[J.J.]

CLAY



(adds more text to meet minimum)

[Setec Astronomy]

Try some IPA, that should do it.

[imported_Larry A]

Kerosene or Mineral Spirits will take it right off.

[Setec Astronomy]

Yeah, that too :o Odorless mineral spirits from the hardware store, just be careful around the plastic and rubber with that, just in case.

[Todd@RUPES]

Take some fresh wax and wipe it on the area. The solvents will re-mix with the product (you may have to aggitate it) and loosen it.



Then wipe off wet...

[edenward]

Thanks so much, I`ll give it a try tomorrow.