Lil Freek
04-12-2008, 01:17 PM
I`ve got a 94 Mazda MX6 and I`m going to be doing the $50 paint job that`s floating around the internet. As with all older poorly-maintained Mazdas (just acquired this car), the clearcoat`s shot and the paint`s fading something fierce.
Here`s a link to the car:
Kodakgallery.comÂ`Join now and receive beautiful photographic prints from your camera (http://www.kodakgallery.com/I.jsp?c=87eonvd5.8h8f5smh&x=0&y=-8ndw4a)
And if you`re not familiar with the $50 paint job:
http://www.rickwrench.com/50dollarpaint.html]Rickwrench (http://www.rickwrench.com/index79master.htm?[url), Alfa GTV, Falcon Squire, Corvair[/url]
I`m not doing this until June, but I`ll be placing my big order for 2008 from eshine.ca, and I`d like to get some feedback from anybody that might have some insight.
I have a PC7424 and all the colors of pads... I`m still quite new to detailing on a `professional` level. I have lots of the Meg`s Professional lineup, and some Poorboys products. I`ll be stocking up on almost the entire Poorboys lineup and some Manzerna products for this year, but for the MX-6, I`m assuming most of those products would be wasted.
I`m thinking of just using a Polish, Sealant and wax on the car. I obviously don`t want a wax with cleaners in it, so I was thinking of doing something like:
Poorboys Professional Polish
Poorboys EX-P Sealant
Collinite Fleetwax #885 (or is #467s better?)
Would that work? It`ll take me about 2 weeks to paint and `cure` the car, so I`ll want this paintjob to last as long as humanly possible, but still look good :)
Thanks!
Here`s a link to the car:
Kodakgallery.comÂ`Join now and receive beautiful photographic prints from your camera (http://www.kodakgallery.com/I.jsp?c=87eonvd5.8h8f5smh&x=0&y=-8ndw4a)
And if you`re not familiar with the $50 paint job:
http://www.rickwrench.com/50dollarpaint.html]Rickwrench (http://www.rickwrench.com/index79master.htm?[url), Alfa GTV, Falcon Squire, Corvair[/url]
I`m not doing this until June, but I`ll be placing my big order for 2008 from eshine.ca, and I`d like to get some feedback from anybody that might have some insight.
I have a PC7424 and all the colors of pads... I`m still quite new to detailing on a `professional` level. I have lots of the Meg`s Professional lineup, and some Poorboys products. I`ll be stocking up on almost the entire Poorboys lineup and some Manzerna products for this year, but for the MX-6, I`m assuming most of those products would be wasted.
I`m thinking of just using a Polish, Sealant and wax on the car. I obviously don`t want a wax with cleaners in it, so I was thinking of doing something like:
Poorboys Professional Polish
Poorboys EX-P Sealant
Collinite Fleetwax #885 (or is #467s better?)
Would that work? It`ll take me about 2 weeks to paint and `cure` the car, so I`ll want this paintjob to last as long as humanly possible, but still look good :)
Thanks!