PDA

View Full Version : Has anyone done sealant, glaze and then nuba`


pingable
02-27-2008, 02:19 PM
I want the protection of sealant but want the wetness of a glaze.

The combo I`m thinking is whatever sealant in my stash .... OS or Z5Pro, followed by RMG and then Souveran.
ricka
02-27-2008, 04:06 PM
I`ve used DG 105, DWG and Souveran or Clearkote Carnauba Wax.



Personally, the sealant and DWG work great without the nuba. All a matter of taste.
imported_themightytimmah
02-27-2008, 04:26 PM
RMG is oily and it has cleaners - I`m not sure if it`ll play nice over a sealant. I know for a fact that Meg`s #7 makes a mess over sealants, as it can`t get into the paint. DWG is more likely to work well with a sealant than RMG.
Low Tech
03-01-2008, 04:43 PM
Used DWG topped w/ OS, then finished w/ Souveran - Outstanding look, but the Souveran is a dust magnet. Even FK 425 QD did not reduce the dust attraction of Souveran.



So now, DWG topped w/ OS as a LSP. Lower dust and the DWG provides wetness/depth and OS the shine. So I don`t miss my old favorite Souveran as omitting it loses near nothing with this combo and is reduces the dust problem.



Plus, acrylic DWG can be layered/sandwiched between OS in alternating fashion. FK 425 or even Z8 also helps keep dust even lower.
mhadden
03-01-2008, 05:22 PM
Currently (like this weekend) I`m using sealant and just put some Zymol Titanium "glaze" over top. I plan on topping the Titanium with one last coat of sealant (Ultima) before the weekend is over...
silkstone
03-01-2008, 09:23 PM
I have used Glaze, Sealant, Then Carnauba.. for a excellent combo....





Seems like the glaze would diminsh the sealant somewhat, used the other way.
Grabby
03-02-2008, 12:25 AM
I`ve heard here that if the glaze is applied before the sealant, the sealant`s durability will significantly lessen.



I did CarLack68 SG + Mothers Sealer and Glaze + P21s 100% Nuba wax and it worked well.



Grabby
detaildoc
03-02-2008, 03:19 AM
Just this weekend I did 2 coats of UPGP, followed by 2 of DWG, followed by 1 more coat of UPGP to seal in the glaze. I plan to top it tomorrow with P21s 100%.
imported_Conan777
03-02-2008, 09:00 AM
Just this weekend I did 2 coats of UPGP, followed by 2 of DWG, followed by 1 more coat of UPGP to seal in the glaze. I plan to top it tomorrow with P21s 100%.

So how does it look now? DO you think the DWG made any significant change to the look of the paint from just the UPGP?
mhadden
03-02-2008, 10:08 AM
I`ve heard here that if the glaze is applied before the sealant, the sealant`s durability will significantly lessen.I`ve heard this as well, that`s why applying the sealant first is a must! Then applying anything afterwards shouldn`t be a big deal.
detaildoc
03-02-2008, 08:34 PM
So how does it look now? DO you think the DWG made any significant change to the look of the paint from just the UPGP?

I would say it increased the wetness by about 35-40%.
detaildoc
03-03-2008, 10:05 PM
Ok, so below are the pics. Again, the process is 2 coats of UPGP, followed by 2 of DWG, followed by 1 more coat of UPGP and one coat of P21S100%. This left the car super wet and the flakes exploding out of the paint.

http://i217.photobucket.com/albums/cc260/lovemyes350/DSC00442.jpg



http://i217.photobucket.com/albums/cc260/lovemyes350/DSC00441.jpg



http://i217.photobucket.com/albums/cc260/lovemyes350/DSC00428.jpg



http://i217.photobucket.com/albums/cc260/lovemyes350/DSC00423.jpg



http://i217.photobucket.com/albums/cc260/lovemyes350/DSC00416.jpg



http://i217.photobucket.com/albums/cc260/lovemyes350/DSC00434.jpg



http://i217.photobucket.com/albums/cc260/lovemyes350/DSC00455.jpg