View Full Version : favorite products with a DA
imageautodetail
12-15-2007, 08:37 PM
Since polishes and compounds break down differently with a rotary verses a DA, I was curious to see what people have stumbled across as there go to polishes for DA polishers, I know there are alot of members that strictly use DA`s so they will probably have a good insight. If I need to finish with a DA I have found myself going to carbrites Superglaze or a mixture I have made up as a one step product with Prokem crystal 2000/and Detailplus paint sealant mixed 80/20 but I am ready to have a few others to use. Ease of removal and dusting results would be a great addition to your feedback
imported_smprince1
12-15-2007, 09:02 PM
I find PBs SSR line and Hi-Temp MC and LC levelers work pretty well with PC.
imported_truzoom
12-15-2007, 10:20 PM
Optimum Hyper Compound works great with a PC. Produces minimal dust and can finish if you work it in long enough.
BigJimZ28
12-15-2007, 10:31 PM
anything I have ever used has worked by PC
imported_hockeyplaya13
12-15-2007, 10:46 PM
I have used SSR 2.5 and 1 and didn`t care for them now. Currently I use Menz IP and PO106FF and love both of them. I have no desire to try other polishes. Soon I will be adding Power Gloss to my arsenal.
BigAl3
12-15-2007, 11:23 PM
the optimum line with PC has worked great for me...
LanceM
12-16-2007, 12:02 AM
menzerna products
Invigor
12-16-2007, 10:39 AM
klasse AIO and SG.
Junebug
12-16-2007, 06:20 PM
Menzerna IP and a low profile orange 5.5" pad.
Legacy
12-16-2007, 07:11 PM
Menzerna:2thumbs:
cheapshot
12-20-2007, 06:07 AM
most products work well with pc, I would not use a burgundy foam cutting pad though, as this pad is to aggressive. I have used a few orange pad, but still like 8006.
I have used Meguiars #84, #80 with great results.
I have used PB`s SSR2.5 ,SSR1 with great results.
I have used a few 3M products with great results.
I have used Klasse AIO with great results.
and many glazes, waxes and sealants.
I got great result using Meguiars 8006 foam polishing pads, with all the polishes I have used. and Meguiars finishing pads for waxes and sealants.
I do get dusting from most products, and yes it is annoying to have to clean the next panel or section before moving on. But that does not mean they don`t work. For example I removed very very bad swirls using #84 and a few 8006 polishing pads.
Time and Patience are key when using the PC. Most products with enough abrasiveness to tackle a tuff job, are going to dust.