PDA

View Full Version : Can I just polish over Klasse SG


1badtaco
11-28-2007, 12:13 AM
I applied KSG about a month ago but I had some sirls I still need to get out. I thought it would be a few months before I was ready to buff those swirls out. But I got some pads and my 1000w light so I figured I might as well do it while the highs are still in the 70`s



any help is appreciated
BigJimZ28
11-28-2007, 12:20 AM
yes the polish will remove the KSG
1badtaco
11-28-2007, 12:31 AM
cool thanx so no need for dawn? Cause I`ll just use my megs nxt soap and than hit it with 83 and 80 before kaio and ksg
Labster
11-28-2007, 02:33 AM
It wouldn`t hurt to clay the car before polishing. In fact, it`s usually a good idea to clay prior to polishing to avoid catching any debris in the pad and swirling and marring the paint with those contaminants. That`s just my .02 though.
Fly Bye
11-28-2007, 04:02 AM
it`s a good idea to clay prior to polishing to avoid catching any debris in the pad and swirling and marring the paint with those contaminants.



Good idea.
Accumulator
11-28-2007, 02:06 PM
Dawn doesn`t really do much to KSG anyhow...



I will note that KSG is the only LSP I`ve ever had problems polishing through- I got a very tenacious residue that was murder to buff off. I ended up using some IPA to compromise the KSG a little and that solved the problem. If you have any problems, which I wouldn`t really expect, just reach for the rubbing alcohol.
jpochile
11-28-2007, 02:39 PM
Labster It wouldn`t hurt to clay the car before polishing. In fact, it`s usually a good idea to clay prior to polishing to avoid catching any debris in the pad and swirling and marring the paint with those contaminants. That`s just my .02 though.



I think the same .
Lowejackson
11-28-2007, 02:54 PM
Assuming no heavy duty polishes have been used and all the products have been properly broken down, I would just use a QD
1badtaco
11-28-2007, 04:51 PM
thanx for all the repliesguys I clayed the car about 4 months ago but I might clay it again after a plastic bag check



Lowejackson: use the qd to break down the ksg??
Lowejackson
11-29-2007, 03:14 PM
Use the QD to clean up after polishing, as an alternative to claying
BigJimZ28
11-29-2007, 03:47 PM
Use the QD to clean up after polishing, as an alternative to claying





how is a QD in anyway a replacement for claying?



:help:
Lowejackson
11-29-2007, 04:01 PM
My apologies if I am misinterpreting the thrust of this thread. As a replacement for claying, a QD would not be effective but as an alternative method for cleaning up after polishing, a QD is a reasonable alternative