View Full Version : Only thing going to get this haze off is a PC huh? Pics
BradUF
11-03-2007, 04:03 PM
http://i107.photobucket.com/albums/m315/EliteLamer/Car3.jpg
http://i107.photobucket.com/albums/m315/EliteLamer/Car1.jpg
a.k.a. Patrick
11-03-2007, 04:23 PM
Ya lost me. Is this a b4 or after?
RTexasF
11-03-2007, 05:22 PM
What haze? The pics don`t show it.
BradUF
11-03-2007, 05:33 PM
Left side above the head light on the hood.
BigAl3
11-03-2007, 05:42 PM
perhaps a close-up pic?
howareb
11-03-2007, 05:49 PM
It is kind of hard to tell what it is from the distance of the shot. Have you tried using an AIO cleaner wax? Or better yet what have you tried to do to it to come to the conclusion of possibly needing a PC.
It can be as simple as a haze from a wax to as complicated as (I hate to say) clear coat issues (if in fact it is a clear).
gocubbies
11-03-2007, 06:26 PM
looks more like oxidation instead of haze. you can try DG 105 or 501. it will yake some off. and use a clay bar before the DG
imported_paradigm
11-04-2007, 04:30 PM
are you talking about that splotchy looking spot just to the right of the passenger headlight...about 8-12 inches up the hood?
i don`t think duragloss (or much any sealant...) will help with oxidation unless is it very, very minor oxidation. you really need to use a PC or other buffer to get the dead paint off there.
imported_Yal
11-05-2007, 10:19 AM
Thats a red car I bet he`s talking about the oxidation.
By hand you can try Meguiars Color X or paint Cleaner. But yes a PC will save your elbows.
Grimm
11-05-2007, 12:18 PM
How can any of you guys honestly give advice without seeing a better picture?? Cripe, that could just be a huge loogey some kid hocked on the hood from that picture.
BuffMe
11-05-2007, 01:21 PM
Well if it does in fact have haze all over, you`re gonna need something pretty abrasive for that hard clear coat (coming from an LS1 owner myself). I`d start with an orange pad and something like Menzerna intensive polish, followed up with a final polish then sealant for the upcoming winter months.
BradUF
11-05-2007, 02:36 PM
I have huge problems with haze, swirls and spots only on the hood and top of the car. Only place where it shows up bad. I order the UDM, I have all the pads and I have Poorboys 2.5 and 1... Think I am ready to go but lol I just waxed the car. Just wash it with dawn right, then polish it right?
BuffMe
11-05-2007, 02:37 PM
Wash with dawn, might try a clay bar to see if that helps remove anything if it`s just some surface oxidation/hazing. Then, get to polishing.
BradUF
11-05-2007, 02:38 PM
lol I have had pads for 6 months and now it is going to happen. I am going to get my car right...
http://i107.photobucket.com/albums/m315/EliteLamer/100_0127-1.jpg
Let me make my check list...
Sonus Clay Bar, check
UDM, check
Pads, check
PoorBoys SSR 2.5 and 1, check
Klasse All in One, check
P21s, check
Am I ready to go guys?
BuffMe
11-05-2007, 02:48 PM
Yep. Go for it.