gmblack3
10-30-2007, 05:51 PM
Just over 2k miles on this big`en.
It has pulled the clients fifth wheel camper once already.
No correction or clay needed. But I had to find a reason to use the metabo. :D
Before pics, well it is just about brand new.
http://img89.imageshack.us/img89/1994/img3434gu2.jpg
http://img223.imageshack.us/img223/3822/img3435ti6.jpg
http://img89.imageshack.us/img89/8637/img3436sw2.jpg
I used DG 901 carwash soap w/ the foam lance. Not sure what the deal was, I used 2oz to 30oz of water. This is the same mix I use with Z7 and I get allot more foam with the Z7. I double checked the mixture setting and it was set at half as usual. :think:
http://img223.imageshack.us/img223/1474/img3437la1.jpg
I did not rinse, but just did a 2 bucket wash with DG 901 soap.
Rinsed down the paint and cleaned the wells, wheels and tires with AM Red Hot APC 1:1. I need to pick up another gallon of this great APC and at $10 a gallon, I will pickup two of them. Rinsed all the above areas with pressure washer.
I decided to use ZAIO as I really like the way it looks on darker colors, even if I am going to use ZFX.
So I got out the metabo, a white LC VC pad and worked the ZAIO in at 1300 or so on all the paint, glass, black and chrome trim.
http://img89.imageshack.us/img89/8454/img3438zq2.jpg
http://img89.imageshack.us/img89/968/img3441eg9.jpg
I then applied 2x of ZFX`d Z5pro.
Applied one application of CS and finished with Z8.
Interior got a quick vac and wipedown.
Tires got 1x of Z-16 and wheels got ZAIO.
Afters:
http://img509.imageshack.us/img509/1526/img3444zl0.jpg
http://img89.imageshack.us/img89/1305/img3450hj3.jpg
http://img89.imageshack.us/img89/9302/img3451sd4.jpg
http://img89.imageshack.us/img89/5163/img3453uk7.jpg
http://img89.imageshack.us/img89/6242/img3455qe8.jpg
http://img509.imageshack.us/img509/1995/img3465zg1.jpg
http://img223.imageshack.us/img223/378/img3460ha1.jpg
It has pulled the clients fifth wheel camper once already.
No correction or clay needed. But I had to find a reason to use the metabo. :D
Before pics, well it is just about brand new.
http://img89.imageshack.us/img89/1994/img3434gu2.jpg
http://img223.imageshack.us/img223/3822/img3435ti6.jpg
http://img89.imageshack.us/img89/8637/img3436sw2.jpg
I used DG 901 carwash soap w/ the foam lance. Not sure what the deal was, I used 2oz to 30oz of water. This is the same mix I use with Z7 and I get allot more foam with the Z7. I double checked the mixture setting and it was set at half as usual. :think:
http://img223.imageshack.us/img223/1474/img3437la1.jpg
I did not rinse, but just did a 2 bucket wash with DG 901 soap.
Rinsed down the paint and cleaned the wells, wheels and tires with AM Red Hot APC 1:1. I need to pick up another gallon of this great APC and at $10 a gallon, I will pickup two of them. Rinsed all the above areas with pressure washer.
I decided to use ZAIO as I really like the way it looks on darker colors, even if I am going to use ZFX.
So I got out the metabo, a white LC VC pad and worked the ZAIO in at 1300 or so on all the paint, glass, black and chrome trim.
http://img89.imageshack.us/img89/8454/img3438zq2.jpg
http://img89.imageshack.us/img89/968/img3441eg9.jpg
I then applied 2x of ZFX`d Z5pro.
Applied one application of CS and finished with Z8.
Interior got a quick vac and wipedown.
Tires got 1x of Z-16 and wheels got ZAIO.
Afters:
http://img509.imageshack.us/img509/1526/img3444zl0.jpg
http://img89.imageshack.us/img89/1305/img3450hj3.jpg
http://img89.imageshack.us/img89/9302/img3451sd4.jpg
http://img89.imageshack.us/img89/5163/img3453uk7.jpg
http://img89.imageshack.us/img89/6242/img3455qe8.jpg
http://img509.imageshack.us/img509/1995/img3465zg1.jpg
http://img223.imageshack.us/img223/378/img3460ha1.jpg