Need a little help.

[tabasco]

Can you guys take a look at these pics and give reccomendations for bringing the shine back. It is a 1990 Mazda Miata. Bod is in good shape, just faded. I do have a PC. I have an orange, white and black pads. SOme Sonus swirl remover, Klasse, some cleaner but nothing real strong as far as cutting. Where would you start?



Thanks,

Randy

[tabasco]

Should I have put this somewhere else?



No guidance? suggestions? please?



Thanks,

RE

[BobD]

You shouldn`t need anything really strong for that. I would go with Red Moose Machine Glaze and top it with a good sealant. It will probably come back over time but for now that is what I would do.

[Eliot Ness]

Yeah, a good AIO type cleaner will do wonders on that. Below is a thread you might find interesting. The product he used was Klasse AIO (http://www.autopia-carcare.com/kus-kla-10.html):



http://autopia.org/forum/hall-fame/23482-behold-power-aio-lots-pictures.html



Unfortunately the pictures seem to have disappeared from that thread, but I found them on his website (it is the red Toyota truck):



Photos (http://www.ocdetails.com/html/photos.html)



Like Bob (Danase) mentioned, follow that up with a good sealant and that red Miata should really pop.

[MrAP]

I would use the Sonus you have first. Then maybe the glaze suggested above, or try the Klasse twins you have. Don`t know if you can do the glaze over the twins.

[imported_themightytimmah]

This was Optimum Polish/orange pad followed by OP/white pad and Souveran



http://i6.photobucket.com/albums/y228/themightytimmah/DSC00012.jpg



http://i6.photobucket.com/albums/y228/themightytimmah/DSC00019.jpg



http://i6.photobucket.com/albums/y228/themightytimmah/Miata-NXT.jpg



Pretty much any mild polish oughta do it.

[tabasco]

Thanks for the help. I will post more pics afterwards. May be a week or 2.