PDA

View Full Version : monzerna/Zaino question



imported_never gone
10-24-2007, 11:53 AM
My friend has a car that is pretty swirl free but just to help with any small swirls I was thinking about using Monzerna Glaze and topping that with a couple coats of Z-2. Thoughts? Thanks.

jshillin
10-24-2007, 12:07 PM
I`ve used both products many times, but not together... I usually top menz glaze with a carnauba and usually put z2 over zaio

imported_never gone
10-24-2007, 02:26 PM
anyone else??

Eliot Ness
10-24-2007, 02:34 PM
Zaino won`t bond very well over a glaze, it might look OK, but the durability will be lacking. If using a glaze I also top it with a carnauba wax.

imported_themightytimmah
10-24-2007, 04:24 PM
Try Z5pro x2 and then go to Z2.

imported_never gone
10-24-2007, 05:08 PM
Try Z5pro x2 and then go to Z2.



That`s the combo I usually do but the filling properties of Z5 are so tiny it really doesn`t do anything. Just wanted try try something different.

SuperBee364
10-24-2007, 10:17 PM
I`ve used Zaino over Menzerna Final Touch Glaze before. The Z2 lasted about two weeks before it was completely gone. That was three coats of ZFX`d Z2.

stilez
10-26-2007, 05:01 PM
I`ve used Zaino over Menzerna Final Touch Glaze before. The Z2 lasted about two weeks before it was completely gone. That was three coats of ZFX`d Z2.



Hard to believe.





For a glaze, I`d top with a carnauba; Zaino should be applied over an oil free surface.

Cleaning Fool
10-26-2007, 08:27 PM
2 weeks, 3 coats?..That I would have to see..

imported_memnuts
10-26-2007, 08:48 PM
By applying Zaino sealants over an oily glaze of any type reduces the Z sealant to no more than a carnauba-containing product in terms of the Z2/5`s ability to tightly bond. This type of application would like last about the same as a carnauba protectant, 2-4 weeks. :(



What you might try is applying the Z5/ZFX x 3 one day, apply a thin layer of a relatively low oil glaze the next day or after next wash, Z6 lightly and apply a coat of Z2PRO.

The Z5Pro x 3 will do some minor filling, the glaze a little more filling, the "lite" Z6 wipe-down will remove the majority of the non-filling (surface) glaze leaving enough "clean" surface for the Z2PRO to bond.

NSXTASY
10-26-2007, 09:45 PM
AFAIK, Menzerna Glaze is acrylic, or at least non-oily, correct? While it wouldnt provide max durability it may look good. I`ve used Danase Wet Glaze under Zaino with zero problems.