imported_Calogero
07-15-2007, 08:38 AM
We all know or will know by now that I`m a MINI freak...Mini obsessed if you will. On top of that, I enjoy keeping my MINI as clean as possible and as shiny as possible as well. My future brother-in-laws brother also owns a Mini and is a huge Mini freak like myself. However, there is one major difference. He drives his Mini through the winter, where I do not. In his line of profession, he doesn`t exactly have the time all the time to upkeep his Mini in the condition that he wants it to be in or what it should be in. And so, a recent visit to me and a conversation about my MINI and detailing led him to ask me to spruce up his baby Lucy and get her back into the shape she deserves and originally was. I agreed without inspection.
This is an older write up so I now have Black Wow so please ignore the part where I speak of waiting for it.
I had to delete some shots because of the 30 limit but you`ll get the just of it.
However, I quickly learned the following.
Foreword:
* Lucy had never been waxed since he took delivery of the car
* Lucy has never been hand washed
* Lucy only received a washing through touchless and the wax the drive through puts on
* Lucy`s once purring engine has never been cleaned
* I didn`t have to spend to much time on the tires and wheels since Lucy is getting outfitted with new ones soon
Some lessons learned:
* Going to buy myself a creeper seat. Sitting on a case of beer just doesn`t do the job I want after a while
* You can always do with more Supreme Shines
When I got the car I evaluated its condition with the owner and went over a few details about what was to take place.
Products Used:
NXT Car Wash with two bucket and Chenille Mit
2 Water Magnet
Blue Clay with Last Touch 1:1
M80
2 x W - 8006 for M80
M83
1 x W - 8006 for M83
M66
W - 8006 for M66
M07
Foam Applicator for M07
M16
Foam Applicator for M16
M21
W - 9006 for M21
Supreme Shine Microfibre
Meguiars Terry Towel
Meguiars Glass Microfibre
Hyper Dressing 4:1
APC 4:1 and APC 10:1
Rain-X
Process:
Wash with NXT Car Wash Soap
Clay
M80 with W - 8006
M83 with W - 8006
M83 with W - 8006
M80 with W - 8006
M80 with W - 8006
M66 with W - 8006
M16 with foam applicator
M07 with foam applicator
M21 with W - 9006 x 2
Black exterior plastic dressed with Hyper Dressing 4:1
Tires dressed with Endurance High Gloss x 2
Interior cleaned with #40 and then dressed with Natural Shine
Rubber Mats cleaned with #40 and then dressed with Hyper Dressing 4:1
Engine Cleaned with APC 10:1 and 4:1 and then dressed with Hyper Dressing 4:1
All windows cleaned with Windex and then topped with Rain-X with Meguiars Glass Towel and Supreme Shine Microfibre
Start Time: 8:00 am
End Time: 9:00 pm with breaks and guests and unexpected visitors (not you Mark or Anthony)
The end results were AWESOME!!! A smooth glass like finish and one sweet shine to this Chilli Red Mini!!!
And now, here`s your writeup and pics for you.
Step 1: The MINI`s finish was inspected from top down.
BUGS BUGS BUGS is all I found. Nothing but BUGS!!! Nothing Gold Glass Bug And Tar Remover can`t handle!!! Works Great!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC00547.JPG
During my inspection, all I found was SWIRLS!!! Take a look for yourself.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC00548.JPG
Gotta love that dealer job. Full of streaks and hazing!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC00549.JPG
If only you could have seen this pillars in person. Much worse. I couldn`t believe how bad they were.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC00550.JPG
"I only go to touchless so the swirls shouldn`t be to bad..."
Really...
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC00551.JPG
It used to be clean. It used to purr. It used to shine. You used to be able to show it off. How`s that nice and dirty engine for you?
So those are suppose to be black wheel wells!!! Those chambers should be a Chilli Red.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC00554.JPG
Where did the MINI go?
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC00556.JPG
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC00557.JPG
One final shot before I begin. The hood. Look at that poor colour and shine.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05861.JPG
In the lower (bottom) portion of this pic you can see some hazing marks left behind from the previous detailer. Not cool!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05864.JPG
Some more hazing for your viewing pleasure.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05865.JPG
While viewing the hood from a different angle (flat across) this is what I saw. What a lovely site to see before I began.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05866.JPG
Step 2: Wash the car.
I could tell that Lucy had been neglected. Touchless or not, it hadn`t had a hand wash and it made a huge difference. It was its first hand wash using the two bucket system and NXT Car Wash Soap with my classic Chenille Mitt. And boy, can I tell you how dirty it was. Brutal. I have four buckets so I`m okay, but the buckets that I use for the tires were completely black and brown and full of philth. I did think at one point that I was going to have to change the tire water it was that bad. But I finished before I got to that point.
Even after a wicked wash, the finish still felt rough, but not nearly as bad as it was before the wash. I captured a picture below that show the hood before I clayed. If you can tell through the lens, the water on the hood isn`t beading at all. I guess I was a little shocked, but really, I should not have been since it`d be a couple years since Lucy had been waxed.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05859.JPG
After claying the car with Meguiars Blue Clay and Last Touch 1:1 you can see a difference already. The water started beading and it started to feel smooth as glass.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05860.JPG
Post clay job, I dried her up using two water magnets and let it sit for a while to let it dry even more. Once I felt it was ready and I was ready to tackle her, I got my test spot all prepped up to see exactly which products and what method I was going to use. Or as I say, my weapon of choice.
The only problem with the Minis is that if you tape, it feels like you`re taping forever because there is so much taping. However, taping is going to be a thing of the past with Black WOW arriving soon !!! Alone, for a Mini, taping takes approx. 1 hour or so.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05867.JPG
Once I finished with my test spot, I had decided that the best method for me to go with that would achieve the results that I would be happy with would be M83 with W - 8006. You always go least aggressive first, and I know that and I tried with M-80 and W - 8006, and after one pass, it just didn`t cut to the results that I wanted that I felt were good enough for myself. I even tried two passes of M-80 and stuff, although it helped a great deal, it just was up to the standards I have set for myself.
And so out comes my M-83 and on to it I went. The entire hood required two passes M83 followed by two passes of M80. I found though that M-83 was leaving behind some lovely streaking and hazing marks that I knew I would have to take care and surely I did as I already had marks to clean up from a previous detailer. M83 was leaving some nice streaking and hazing marks that I had to take care of.
Throughout this step, I was constantly inspecting the finish at every possible angle using a variety of lighting. One was my handheld Noma Zenon and LED light and the others were two 500 watt Halogen Lights on a stand. This helped me see if I was achieving the results I was after.
Through this stage I went through one backing plate and two pads of M80 and M-83. Lucky for me I had plenty of extra. I stopped as I always do, every four product applications to clean the pad off of product build up, but I still knew that a cleaner pad would better help me achieve those results I wanted.
Remember all those marks on the hood a while back???
Bye bye bye...
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05868.JPG
This is a hood shot after I passed M66 to help clear it up even more. Awesome results here!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05869.JPG
How about them pillars. I had to hit them hard and even spoke with Richard about them. Not these exact pillars but other pillars that I had to solve and he gave me some pointers :D !!! I hit them M-80 but didn`t cut it. So out comes my M-83 and BOOM after some hammering down, all GONE!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05871.JPG
Once I finished with M-83 and M-80, I gave this Chilli Red a good coat of M07 with a foam applicator and taken off with a Supreme Shine MF to help with the shine and gloss that the Classic Mini deserved. And after taking it off, I think I achieved that exact result. Reflections are already starting to show up.
I remember, when I first picked it up and looked it, there was barely a reflection on any of the panels.
After M83 and M80, I decided to give the classic M07 a go and add some nice richness to this Chilli Red Mini Classic!!! And that is exactly what it did. You can see some reflection already. At first, when I got the MINI there was barely anything and now I was starting to smile!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05872.JPG
I had to take a break here to just relax a bit and get some grub to chow down. Was getting tired and hungry in this heat. And so during my break, I decided what I wanted to use. I orginally talked about using NXT to a friend who stopped by, but then figured I didn`t have enough to do two coats so after looking at all my weapons of choice, figured I give it a go with M16 and a foam applicator. And so I went.
I was after a nice deep reflection and after using M16, I got exactly that. I was happy with that M16 achieved and will def. be using it more often in the near future.
Some M16 results!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05877.JPG
How about that engine. Remember how dirty it was. Well the below pictures are the results of 1.5-2 hours of hard work!!!
Combine some APC 10:1 and then APC 4:1 for those stubborn stains/grease spots, a MF, some soap and water, and some fine detailing and you get the results you`re after!!!
How? I first started by spraying the entire engine down and NOT covering a single thing. Did I have any problems? NOPE. Lucy started first crank as I expected.
Once I finished cleaning and detailing the engine, I gave all the painted parts a coat of M21 while the rest got two coats of Hyper Dressing 4:1. He told me that he wanted his engine to shine and that is exactly what I did for me. With two coats of Hyper Dressing, I let the second coat sit for about 1-2 hours and then just went back and wiped off the excess dressing!!! Worked AWESOME!!!
Have a look!!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05882.JPG
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05883.JPG
M83 - Check. M80 - Check. M66 - Check. M07 - Check. M16 - Check. Now after completing the above, it was time to top it off with my LSP favourite as of now: M21, until I switch to Prima Epic.
But WOW what awesome results!!!
Door shot!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05886.JPG
The Classic Reflection Banner SHOT!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05892.JPG
HELLO AUTOPIA!!!
ps. I tried this prior to waxing and was all a blurr!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05893.JPG
SUN SHOTS!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05898.JPG
Just so you remember it was a MINI I was doing!!!
Polished out the chrome boot handle and MINI emblem!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05899.JPG
Kiss those streaks GOODBYE!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05900.JPG
Shot of passenger side!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05901.JPG
All done. Cheers everyone. Time for a break/drink!!!
The End.
Thanks for looking,
Buff N Stuff Detailing
Calogero
This is an older write up so I now have Black Wow so please ignore the part where I speak of waiting for it.
I had to delete some shots because of the 30 limit but you`ll get the just of it.
However, I quickly learned the following.
Foreword:
* Lucy had never been waxed since he took delivery of the car
* Lucy has never been hand washed
* Lucy only received a washing through touchless and the wax the drive through puts on
* Lucy`s once purring engine has never been cleaned
* I didn`t have to spend to much time on the tires and wheels since Lucy is getting outfitted with new ones soon
Some lessons learned:
* Going to buy myself a creeper seat. Sitting on a case of beer just doesn`t do the job I want after a while
* You can always do with more Supreme Shines
When I got the car I evaluated its condition with the owner and went over a few details about what was to take place.
Products Used:
NXT Car Wash with two bucket and Chenille Mit
2 Water Magnet
Blue Clay with Last Touch 1:1
M80
2 x W - 8006 for M80
M83
1 x W - 8006 for M83
M66
W - 8006 for M66
M07
Foam Applicator for M07
M16
Foam Applicator for M16
M21
W - 9006 for M21
Supreme Shine Microfibre
Meguiars Terry Towel
Meguiars Glass Microfibre
Hyper Dressing 4:1
APC 4:1 and APC 10:1
Rain-X
Process:
Wash with NXT Car Wash Soap
Clay
M80 with W - 8006
M83 with W - 8006
M83 with W - 8006
M80 with W - 8006
M80 with W - 8006
M66 with W - 8006
M16 with foam applicator
M07 with foam applicator
M21 with W - 9006 x 2
Black exterior plastic dressed with Hyper Dressing 4:1
Tires dressed with Endurance High Gloss x 2
Interior cleaned with #40 and then dressed with Natural Shine
Rubber Mats cleaned with #40 and then dressed with Hyper Dressing 4:1
Engine Cleaned with APC 10:1 and 4:1 and then dressed with Hyper Dressing 4:1
All windows cleaned with Windex and then topped with Rain-X with Meguiars Glass Towel and Supreme Shine Microfibre
Start Time: 8:00 am
End Time: 9:00 pm with breaks and guests and unexpected visitors (not you Mark or Anthony)
The end results were AWESOME!!! A smooth glass like finish and one sweet shine to this Chilli Red Mini!!!
And now, here`s your writeup and pics for you.
Step 1: The MINI`s finish was inspected from top down.
BUGS BUGS BUGS is all I found. Nothing but BUGS!!! Nothing Gold Glass Bug And Tar Remover can`t handle!!! Works Great!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC00547.JPG
During my inspection, all I found was SWIRLS!!! Take a look for yourself.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC00548.JPG
Gotta love that dealer job. Full of streaks and hazing!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC00549.JPG
If only you could have seen this pillars in person. Much worse. I couldn`t believe how bad they were.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC00550.JPG
"I only go to touchless so the swirls shouldn`t be to bad..."
Really...
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC00551.JPG
It used to be clean. It used to purr. It used to shine. You used to be able to show it off. How`s that nice and dirty engine for you?
So those are suppose to be black wheel wells!!! Those chambers should be a Chilli Red.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC00554.JPG
Where did the MINI go?
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC00556.JPG
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC00557.JPG
One final shot before I begin. The hood. Look at that poor colour and shine.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05861.JPG
In the lower (bottom) portion of this pic you can see some hazing marks left behind from the previous detailer. Not cool!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05864.JPG
Some more hazing for your viewing pleasure.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05865.JPG
While viewing the hood from a different angle (flat across) this is what I saw. What a lovely site to see before I began.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05866.JPG
Step 2: Wash the car.
I could tell that Lucy had been neglected. Touchless or not, it hadn`t had a hand wash and it made a huge difference. It was its first hand wash using the two bucket system and NXT Car Wash Soap with my classic Chenille Mitt. And boy, can I tell you how dirty it was. Brutal. I have four buckets so I`m okay, but the buckets that I use for the tires were completely black and brown and full of philth. I did think at one point that I was going to have to change the tire water it was that bad. But I finished before I got to that point.
Even after a wicked wash, the finish still felt rough, but not nearly as bad as it was before the wash. I captured a picture below that show the hood before I clayed. If you can tell through the lens, the water on the hood isn`t beading at all. I guess I was a little shocked, but really, I should not have been since it`d be a couple years since Lucy had been waxed.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05859.JPG
After claying the car with Meguiars Blue Clay and Last Touch 1:1 you can see a difference already. The water started beading and it started to feel smooth as glass.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05860.JPG
Post clay job, I dried her up using two water magnets and let it sit for a while to let it dry even more. Once I felt it was ready and I was ready to tackle her, I got my test spot all prepped up to see exactly which products and what method I was going to use. Or as I say, my weapon of choice.
The only problem with the Minis is that if you tape, it feels like you`re taping forever because there is so much taping. However, taping is going to be a thing of the past with Black WOW arriving soon !!! Alone, for a Mini, taping takes approx. 1 hour or so.
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05867.JPG
Once I finished with my test spot, I had decided that the best method for me to go with that would achieve the results that I would be happy with would be M83 with W - 8006. You always go least aggressive first, and I know that and I tried with M-80 and W - 8006, and after one pass, it just didn`t cut to the results that I wanted that I felt were good enough for myself. I even tried two passes of M-80 and stuff, although it helped a great deal, it just was up to the standards I have set for myself.
And so out comes my M-83 and on to it I went. The entire hood required two passes M83 followed by two passes of M80. I found though that M-83 was leaving behind some lovely streaking and hazing marks that I knew I would have to take care and surely I did as I already had marks to clean up from a previous detailer. M83 was leaving some nice streaking and hazing marks that I had to take care of.
Throughout this step, I was constantly inspecting the finish at every possible angle using a variety of lighting. One was my handheld Noma Zenon and LED light and the others were two 500 watt Halogen Lights on a stand. This helped me see if I was achieving the results I was after.
Through this stage I went through one backing plate and two pads of M80 and M-83. Lucky for me I had plenty of extra. I stopped as I always do, every four product applications to clean the pad off of product build up, but I still knew that a cleaner pad would better help me achieve those results I wanted.
Remember all those marks on the hood a while back???
Bye bye bye...
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05868.JPG
This is a hood shot after I passed M66 to help clear it up even more. Awesome results here!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05869.JPG
How about them pillars. I had to hit them hard and even spoke with Richard about them. Not these exact pillars but other pillars that I had to solve and he gave me some pointers :D !!! I hit them M-80 but didn`t cut it. So out comes my M-83 and BOOM after some hammering down, all GONE!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05871.JPG
Once I finished with M-83 and M-80, I gave this Chilli Red a good coat of M07 with a foam applicator and taken off with a Supreme Shine MF to help with the shine and gloss that the Classic Mini deserved. And after taking it off, I think I achieved that exact result. Reflections are already starting to show up.
I remember, when I first picked it up and looked it, there was barely a reflection on any of the panels.
After M83 and M80, I decided to give the classic M07 a go and add some nice richness to this Chilli Red Mini Classic!!! And that is exactly what it did. You can see some reflection already. At first, when I got the MINI there was barely anything and now I was starting to smile!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05872.JPG
I had to take a break here to just relax a bit and get some grub to chow down. Was getting tired and hungry in this heat. And so during my break, I decided what I wanted to use. I orginally talked about using NXT to a friend who stopped by, but then figured I didn`t have enough to do two coats so after looking at all my weapons of choice, figured I give it a go with M16 and a foam applicator. And so I went.
I was after a nice deep reflection and after using M16, I got exactly that. I was happy with that M16 achieved and will def. be using it more often in the near future.
Some M16 results!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05877.JPG
How about that engine. Remember how dirty it was. Well the below pictures are the results of 1.5-2 hours of hard work!!!
Combine some APC 10:1 and then APC 4:1 for those stubborn stains/grease spots, a MF, some soap and water, and some fine detailing and you get the results you`re after!!!
How? I first started by spraying the entire engine down and NOT covering a single thing. Did I have any problems? NOPE. Lucy started first crank as I expected.
Once I finished cleaning and detailing the engine, I gave all the painted parts a coat of M21 while the rest got two coats of Hyper Dressing 4:1. He told me that he wanted his engine to shine and that is exactly what I did for me. With two coats of Hyper Dressing, I let the second coat sit for about 1-2 hours and then just went back and wiped off the excess dressing!!! Worked AWESOME!!!
Have a look!!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05882.JPG
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05883.JPG
M83 - Check. M80 - Check. M66 - Check. M07 - Check. M16 - Check. Now after completing the above, it was time to top it off with my LSP favourite as of now: M21, until I switch to Prima Epic.
But WOW what awesome results!!!
Door shot!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05886.JPG
The Classic Reflection Banner SHOT!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05892.JPG
HELLO AUTOPIA!!!
ps. I tried this prior to waxing and was all a blurr!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05893.JPG
SUN SHOTS!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05898.JPG
Just so you remember it was a MINI I was doing!!!
Polished out the chrome boot handle and MINI emblem!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05899.JPG
Kiss those streaks GOODBYE!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05900.JPG
Shot of passenger side!!!
http://insoundsoft.mine.nu/kaoss/uploaded_images/Detailing/Chilli%20Red%20Mini/DSC05901.JPG
All done. Cheers everyone. Time for a break/drink!!!
The End.
Thanks for looking,
Buff N Stuff Detailing
Calogero