JaredPointer
06-06-2005, 07:10 AM
Continuing on with my weekend of review posts…..
Sorry about not having any pics, my camera acted funny at times, leaving me with some bad pictures. :(
Product: Detailer’s Pride Final Finishing Polish (FFP)
Packaging: Packaged in a white 8 ounce bottle with a wrap-around type label. Nothing flashy, but the label states what the product is and contains directions and warnings and so forth. The dispenser cap on the sample 8 ounce bottles are nice.
Price: $14.95 USD for 16 ounces of product. That’s $.93 USD per ounce. There’s a bulk size as well that’s $26.95 USD for 32 ounces of MSE. That makes it $.84 per ounce.
Directions: Nowhere on the label did it state to shake the polish. I think as with all polishes, you should keep it well shaken. They state to use a cutting or light cut pad with a machine polisher, not to exceed 4,500 RPM. This is another problem I have with the directions (this has already been pointed out by HollandPatrick). Also, the product can be applied by hand. They state when the polish begins to dry, you should stop and remove the residue using a MF towel. Always finish with a wax or sealant.
Cautions, Hints, etc: Standard caution about being harmful if swallowed and avoiding contact with eyes. Also, there is a statement about the mfg not being liable for misuse. There’s a quick intro to the product explaining how diminishing abrasives work.
Product: The Final Finishing Polish is a creme colored polish. In using it, I don’t think it is abrasive at all. I will probably use it more as a chemical cleaner polish. It has a chemical smell.
Usage: I used an Edge polish (blue) pad for the FFP as well as some sections by hand just to try it out. By hand, it applied very easily. By PC, it applied easy and spread pretty far. I think the only “bite” it had as far as any type of swirl removal would be the pad. For reference I used an Edge polish (blue) pad.
I liked the ease of use of this product, although in some places removal of residue was a little more work than others. I think this would be a good polish to use inbetween full detail to remove wax or old sealant and get a fresh start. I also think it made a good base for the DP sealant and cleaned the back glass (for test purposes) very well. It removed some water spotting on the glass and left a nice clean look.
Click here to read more about FFP or to buy some from Autogeek!!! (http://www.autogeek.net/dp555.html)
Sorry about not having any pics, my camera acted funny at times, leaving me with some bad pictures. :(
Product: Detailer’s Pride Final Finishing Polish (FFP)
Packaging: Packaged in a white 8 ounce bottle with a wrap-around type label. Nothing flashy, but the label states what the product is and contains directions and warnings and so forth. The dispenser cap on the sample 8 ounce bottles are nice.
Price: $14.95 USD for 16 ounces of product. That’s $.93 USD per ounce. There’s a bulk size as well that’s $26.95 USD for 32 ounces of MSE. That makes it $.84 per ounce.
Directions: Nowhere on the label did it state to shake the polish. I think as with all polishes, you should keep it well shaken. They state to use a cutting or light cut pad with a machine polisher, not to exceed 4,500 RPM. This is another problem I have with the directions (this has already been pointed out by HollandPatrick). Also, the product can be applied by hand. They state when the polish begins to dry, you should stop and remove the residue using a MF towel. Always finish with a wax or sealant.
Cautions, Hints, etc: Standard caution about being harmful if swallowed and avoiding contact with eyes. Also, there is a statement about the mfg not being liable for misuse. There’s a quick intro to the product explaining how diminishing abrasives work.
Product: The Final Finishing Polish is a creme colored polish. In using it, I don’t think it is abrasive at all. I will probably use it more as a chemical cleaner polish. It has a chemical smell.
Usage: I used an Edge polish (blue) pad for the FFP as well as some sections by hand just to try it out. By hand, it applied very easily. By PC, it applied easy and spread pretty far. I think the only “bite” it had as far as any type of swirl removal would be the pad. For reference I used an Edge polish (blue) pad.
I liked the ease of use of this product, although in some places removal of residue was a little more work than others. I think this would be a good polish to use inbetween full detail to remove wax or old sealant and get a fresh start. I also think it made a good base for the DP sealant and cleaned the back glass (for test purposes) very well. It removed some water spotting on the glass and left a nice clean look.
Click here to read more about FFP or to buy some from Autogeek!!! (http://www.autogeek.net/dp555.html)