Help me find a PC!

[jiffy]

I want to make sure I get the right combo of stuff when I buy my PC, as well as not get more pads than a newbie really needs (My budget is pretty limited).

I was looking at getting the PC 7424 at Coastal Tool (http://www.coastaltool.com/cgi-bin/SoftCart.exe/a/port/pr7424.htm?L+coastest+dgpp8929ff6f096f) for $127 shipped. It comes with a 6" hook and loop backing pad and a 6" counterweight.

From here, as far as pads go, I don`t know if I need (or want) the Edge Dual pads or regular velcro pads?

I thought about this Edge Kit (http://www.autogeek.net/foam-polishing-kit.html) from autogeek, which comes with 1 yellow, green, blue, and white pad (all 6"), plus 2 cobra detail cloths, and the edge quick connect adapter. The price on this is $85+ shipping (more than I wanted to spend).

Do I still need the quick connect adapter if the PC comes with the hook and loop backing plate anyways?

I could get just the green, blue, and white pad + the quick connect adapter for $71 + shipping (still a little more than I wanted to spend) from autogeek as well or am I going to want a yellow pad too just in case?

Another option is to get some assortment of 6.5" LC pads from TOL. The pads there are 8.95 each, so I could get maybe 1 orange, 2 white, and 1 black (or another combo someone here recomends). I believe if I go this route I will also need another backing plate (ie. the hook and loop won`t work with these pads), would I want a 6" or 5" backing plate?

[jaybs02]

If you have a lowes near you they have the 7336 which is the same as the 7424 with the 6" c/w for about $100, and then you could just pick up some pads and a backing plate.

Autogeek also has the PC and pad kit (http://www.autogeek.net/hk7424.html)
You could also try sending a PM to Dwayne, he may something that he doesn`t have listed on PremiumAutoCare`s (http://www.premiumautocare.com/index.html) site.

Don`t forget when figuring prices the discount you get from some of our sponsors.

Good luck
"J"

[jiffy]

I forgot to mention, I called Lowe`s this morning, after being on hold for 10 minutes I finally got someone in Tools, who said they don`t have the 7336 or the 7424. I foudn this suprising.

I PC kit might be a cheaper route, something I will have to compare with my other possibilities.

[jpzapata]

For what I have heard is that Lowes and home depot have stop carrying the PC and are only selling what they have in stock. Supposedly Porter Cable is going through a company merge. With what company? I dont remember, but I know it is a known hardware company. Also if you are still looking for a pc let me know I have a new 7336 that I dont need anymore and I am willing to sell it. PM me if you are interested.

[JaredPointer]

I believe it is Black & Decker.

[jiffy]

I still need some clarification/help choosing which pads/backing plate to get :)

Remember, the PC from coastaltools comes with a hook and loop backing plate, but I`m not sure what pads use that (I think the Edge 2000`s would) or if that is my best (ie. cheapest) option.

If I get velcro pads, I`m probably going to go with LC because I`ve read a lot around here that they make a solid pad.

At least if some people could tell me exactly what kind, size, and how many pads to get for a "beginners set", I can work on finding the best prices on my own.

[JaredPointer]

It`s really a matter of personal choice. I like the 6" pads with a 5" back plate. As far as how many to have for a beginner, maybe get a medium cut, a light cut, a couple of polishing, and a finishing pad. That should get you started out right.

[ZIGSGT]

I just received my first PC "7424" today. I bought it off EBAY for $113.52 shipped. It took me a couple of tries to win one that low but it was worth it.

[jiffy]

EDITED

Ok I`ve set up a few possibilities for what I can purchase and how much it will cost me. I`m not sure what I will actually need, so here is what I can do:

Option 1: PC Kit from AutoGeek (http://www.autogeek.net/hk7424.html) $190 shipped

Option 2: PC from CoastalTool (with a 5" and 6" counterweight plus a 6" backing plate) and an Orange, 2 White, and a Black 6.5" LC pads from TOL $169 shipped (or I could get 7.5" pads for $173 shipped)

Option 3: PC Kit From TOL (http://www.topoftheline.com/tolae/porcabpolpac.html) (I think this kit has more than I need in it) $204 shipped

Option 4: PC 7336 from Lowe`s, 5" Backing Plate from AutoGeek, and an Orange, 2 White, and a Black 6.5" LC pads from TOL $183 shipped

Option 5: PC 7336 from Lowe`s plus The Edge Dual Action kit from Autogeek (http://www.autogeek.net/foam-polishing-kit.html) for $209 shipped

If the 6" counterweight and 7.5" pads would be a good combo, I definitely think Option 2 is the way to go. But if I am better off with a 5" backing plate and 6.5" pads, Option 1 or 4 will be the best choice.

So...opinions now?

[jiffy]

My own edit again.

As long as the Autogeek kit has what I will need, I can get the kit plus PB SSR 1 and 2.5 as well as Klasse AIO and 4* UPP for under $250 shipped all from autogeek. Now that is looking like the best option for me.

[CharlesW]

Just a comment or two.
1. You can drive yourself crazy trying to figure out the best deal.
Been there, done that.
2. Running around to several stores to find a better price could cost you more than you would save.
Been there, done that.
3. I would not buy a 6" backing plate, but that`s just my opinion.

Charles

[LINYScrew]

You might want to check autodetailingsolutions.com for kits. Good prices and very helpful, call Rick.

[DetailQueen]

Have the 7424 and like it a lot...dont forget to use your discount if you get it from one of the vendors like autogeek.
Lake country pads 6" with 5" backing plate is my choice on the accessories

[BlackSunshine]

20/20 customs has a kit for 179.00
http://www.2020kustoms.com/?product&ID=55