RMG over PS

[richy]

I received my order of RMG after applying a few coats of PS. Will the RMG have enough cutting power to cut through the PS to benefit the black paint or should I polish it off with FPII or something? I want to try the RMG but don`t want to waste my time if it won`t penetrate the PS.

[imported_DieselMDX]

I would polish with FP2 with a gray lc pad and get the paint bare then apply rmg and top with PS





U will be amazed

[joshtpa]

Wouldnt the PS take the RMG right off? I would not top RMG with PS.

[rkf76]

Wouldnt the PS take the RMG right off? I would not top RMG with PS.PS has cleaners in it? This is Pinnacle Souveran we`re talking about, right?

[joshtpa]

I thought he was speaking of Poli Seal, but you are probably right

[imported_Steelth]

I thought he was speaking of Poli Seal, but you are probably right



No that would be OPS not PS :goodjob

[ADHD]

red moose glaze topped with pinnacle souveran is an AWESOME COMBO!!



that means apply RMG FIRST,, then put Souveran on top!!:2thumbs:

[richy]

red moose glaze topped with pinnacle souveran is an AWESOME COMBO!!



that means apply RMG FIRST,, then put Souveran on top!!:2thumbs:

To correct what I already have, just to clarify..does RMG have cleaners in it that will remove the p.s. (souveran) or do I need to polish with FpII first prior to the RMG? Thanks

[orngez]

rmg will remove the ps...

[joshtpa]

I am looking at the bottle and it says no abrasives, but I believe there are some cleaners in it. Mild though.

[DM101]

RMG will remove PSouveran. Go the FPII, RMG (X 2 optional), then PS X 2 24 hours apart.

[joshtpa]

If the RMG would take off the PS, then wouldnt the 2nd layer of RMG take off the first layer?

[rkf76]

If the RMG would take off the PS, then wouldnt the 2nd layer of RMG take off the first layer?I don`t think the point is to layer it though, but yes, the second would remove the first.

[imported_DieselMDX]

I used pink moose and topped it with PS and was very impressed, the only bad thing was the durability of PS