best sealant to top with P21S Carnauba Wax

[CelicaPhong]

I was wondering what sealant can I use b4 putting some P21S Carnauba Wax.



And also is collinite #845 considered a wax or sealant ??

[freestyla]

I use S100...pretty much the same as P21S. But before I put on the S100, I apply 2 coats of NXT. I`ve used this combo for some while now, and I still love it.

I am looking into getting some 845! I keep on hearing that it is one of the longest lasting waxes. I heard that you can get it at Car Quest or NAPA, but I have had no success in my area.

[Tiauguinho]

Doesn`t NXT have cleaners? Is that ok when you top NXT with P21S?

[joshtpa]

I use S100...pretty much the same as P21S. But before I put on the S100, I apply 2 coats of NXT. I`ve used this combo for some while now, and I still love it.

I am looking into getting some 845! I keep on hearing that it is one of the longest lasting waxes. I heard that you can get it at Car Quest or NAPA, but I have had no success in my area.



Why put on 2 coats of NXT? The 2nd one will take off the first one.

[coupe]

Why does everyone think NXT has strong cleaners in it?

They are so minute that they might as well not be there.

It is NOT an AIO or a cleaner wax in any way shape or form.

[joshtpa]

It does contain enough cleaners to strip or partially strip off what is underneath it though.

[CelicaPhong]

so which other sealant will work well with P21S ???



I`m using collinite #845 right now....

I heard if i use a sealant and top it with a carnauba wax it gives better result optically is that true?

[DM101]

Make sure your car is polished clean first. Like Menzerna`s Final Polish II. (optional step..one coat of Red Moose Glaze) Then apply Meguiars #21 sealant Synthetic Sealant M2116 Product Information (http://www.meguiars.com/?pro-liquid-car-waxes/Synthetic-Sealant) Wait 24 hours and apply your wax. The results will be stunning!!!!!

[CelicaPhong]

I see I have to wait 24 hrs ?



What I do is wash/clay/menzerna IP and FP2/RMG/ Then b4 it was collinite #845....but i hear that if i put sealant and P21S its gonna look a hell lot better!!





so #21 would be the choice to use with P21S ??? and I have to wait 24 hrs right?

[DM101]

That is my opinion. #21 will give you a excellant base (or you can leave as is). You should wait 24 hours so the #21 can cure and bond to the car. Then come with your topper if you like P21S. And apply it. If you add a second coat of P21S wait 12 to 24 hours. You will be very pleased.








I see I have to wait 24 hrs ?



What I do is wash/clay/menzerna IP and FP2/RMG/ Then b4 it was collinite #845....but i hear that if i put sealant and P21S its gonna look a hell lot better!!





so #21 would be the choice to use with P21S ??? and I have to wait 24 hrs right?

[imported_Ivan Rajic]

^^I agree with the #21... my favorite product of all time is KSG, so I would top that with P21S, but meg`s #21 works well also