Todays Grand Cherokee

[2StepsAhead]

Still can`t seem to get 100% swirl free..



Process was:



Wash with Meguiars GC

Spot clay with Meguiars clay kit

Optimum Compound on a 5in orange cutting pad

Optimum Polish on a 6in white polishing pad

Collinite IW applied by hand

Natty`s Blue applied by hand in some certain places



This is how I got it..

http://www.siracingsucks.com/images/Misc/Detail/NoRemorse/GC01.jpg

http://www.siracingsucks.com/images/Misc/Detail/NoRemorse/GC02.jpg



Under the 1000w lights..

http://www.siracingsucks.com/images/Misc/Detail/NoRemorse/GC03.jpg



After two passes of Optimum Compound, switched to a smaller pad for the 2nd pass..

http://www.siracingsucks.com/images/Misc/Detail/NoRemorse/GC04.jpg

http://www.siracingsucks.com/images/Misc/Detail/NoRemorse/GC05.jpg



After applying Collinite IW I took it out for a final inspection

http://www.siracingsucks.com/images/Misc/Detail/NoRemorse/GC06.jpg

http://www.siracingsucks.com/images/Misc/Detail/NoRemorse/GC07.jpg

http://www.siracingsucks.com/images/Misc/Detail/NoRemorse/GC08.jpg

http://www.siracingsucks.com/images/Misc/Detail/NoRemorse/GC09.jpg



In the 3rd to last pic you can see some minor swirling still in there...I went slow and over lapped, I`m going to try and work in even smaller areas next time. Any criticism/remarks welcome...

[BigAl3]

I`m going to try and work in even smaller areas next time.



that is the key, other than that nice improvement! :xyxthumbs

[Scottwax]

Based on the before shots, you did an excellent job for using just a PC. Looks really good to me. :)