Z5pro + Zfx + Z8??

[danforz]

Hey guys... I read in a thread that adding 2-3 sprays of Z8 into your Z5/zfx mixture is a good idea. Granted Z8 is expensive, I`m curious if many of you out there have found this practice to be worth while? Opinions?

[TEGBOY]

I tried it, I didn`t like it. I found it made the Z5Pro + ZFX mix very thick and gloopy. I prefered to use the Z8 as a seperate step.

[Sergei]

I read someone did the shot of Z8 with Z5 and/or Z2 into the mixing bottle. My experience is that it is worth it. My impression is that I can really get a thinner coat with a squirt of Z8. It seems to be slicker as well. I would just try it... doesn`t hurt.

[imported_memnuts]

I read someone did the shot of Z8 with Z5 and/or Z2 into the mixing bottle. My experience is that it is worth it. My impression is that I can really get a thinner coat with a squirt of Z8. It seems to be slicker as well. I would just try it... doesn`t hurt.



Sergei, I came to the same conclusion but only used a 1/2 squirt. Thinner application and if allowed to remain on paint for 30 mins or more it seems to leave very little residual to buff off (result of thinness of applied product).

[imported_rydawg]

I just do a squirt

[klnyc]

I finally ran out of Z8 last week. I just placed an order of AW as my replacement. I hope I dont have bonding issue on top on z5pro or CS.

[imported_DieselMDX]

i do one squirt also, if Sean does it I do it, that man is a genious with Zaino

[joshtpa]

AW will not have bonding issues. I dont think it is quite as good as Z8, but still a great product.

[wannafbody]

I finally ran out of Z8 last week. I just placed an order of AW as my replacement. I hope I dont have bonding issue on top on z5pro or CS.



after a wash there shouldn`t be an issue with AW but I`d suggest using ZFX with Z2pro just in case.

[imported_GregCavi]

i do one squirt also, if Sean does it I do it, that man is a genious with Zaino



Yup. 1 trigger pull for me, too.



Greg

[longhornbsbll15]

can you put z6 in the zfx`d z-5 also?

[imported_memnuts]

I finally ran out of Z8 last week. I just placed an order of AW as my replacement. I hope I dont have bonding issue on top on z5pro or CS.



Should have no problems, just a change in appearance from Z8 but still good.

Just wash prior to layering and Z sealants with or without ZFX will bond. AW doesn`t bond (integrate itself into the Zaino crosslink matrix) with Zaino so displacement by washing is quite easy.

[W8liftr]

One squirt/pull into how much of the Z5P/ZFX mixture? I usually only mix a half ounce of either Z5P or Z2P and ZFX.