Blackfire SRC

[LX_Blake]

I have very light swirls on my 2006 vehicle, I plan to use Blackfire SRC polish, which Edge2000 DA pad should I use, Orange or Blue? The car is in very good condition.



Thanks

[imported_GMCloud27]

I would recommend first using the Blue pad first then move up to the orange if needed. Blue is a finishing pad and orange is a light-cut pad and typically used with FPII/SRC. The only reason I say to use the Blue over Orange first is because of the car`s shape and that you`ll want to use the least aggressive pad first and see the results.

[LX_Blake]

Edge2000 DA grade is as follow (strong to light cut). I look this up at Autogeek.net



Yellow, Green, Orange, Blue & White.

[imported_GMCloud27]

Oh wow!! Sorry about that Blake, I just noticed my mixup!! :shocked: Yes, Orange over Green (I`m mixing them up with another H&L pad set)

[imported_GMCloud27]

Edited my post above... I must have been a bit "out of it" on that reply-Sorry about that