blkyukon
03-16-2007, 04:48 PM
This is a friend of mine`s car that I`ve been procrastinating doing...finally bit the bullet and tackled it.
03 Black Highlander
Products used
PC
SSR3 - Cutting pad
PO85RD - Polishing pad
4Star - UPP
Souveran Paste wax
Here are the befores:
http://melncal.com/detailing/pictures/highlander/before_full.jpg
:bolt
http://melncal.com/detailing/pictures/highlander/before_01.jpg
http://melncal.com/detailing/pictures/highlander/before.jpg
Nothing was touching these so I decided to break out SSR3 and a cutting pad..finally getting somewhere, with very little hazing.
The thing to remember with SSR3 is DO NOT prime the pad with a qd or water...Priming the pad will lead to heavy hazing.
http://melncal.com/detailing/pictures/highlander/ssr3_haze_side.jpg
Here is the hazing left from SSR3 up close:
http://melncal.com/detailing/pictures/highlander/ssr3_haze.jpg
Here is after PO85RD - polishing pad:
http://melncal.com/detailing/pictures/highlander/ssr3_po85rd.jpg
Here is another before and after:
http://melncal.com/detailing/pictures/highlander/bna_01_before.jpg
http://melncal.com/detailing/pictures/highlander/bna_01_after.jpg
This was a 2 day process and here it is after UPP and Souveran paste wax:
http://melncal.com/detailing/pictures/highlander/_DSC9850.jpg
http://melncal.com/detailing/pictures/highlander/_DSC9841.jpg
http://melncal.com/detailing/pictures/highlander/_DSC9837.jpg
http://melncal.com/detailing/pictures/highlander/_DSC9836.jpg
http://melncal.com/detailing/pictures/highlander/_DSC9830.jpg
http://melncal.com/detailing/pictures/highlander/_DSC9831.jpg
Not a 100% perfect...but a 100% better!
03 Black Highlander
Products used
PC
SSR3 - Cutting pad
PO85RD - Polishing pad
4Star - UPP
Souveran Paste wax
Here are the befores:
http://melncal.com/detailing/pictures/highlander/before_full.jpg
:bolt
http://melncal.com/detailing/pictures/highlander/before_01.jpg
http://melncal.com/detailing/pictures/highlander/before.jpg
Nothing was touching these so I decided to break out SSR3 and a cutting pad..finally getting somewhere, with very little hazing.
The thing to remember with SSR3 is DO NOT prime the pad with a qd or water...Priming the pad will lead to heavy hazing.
http://melncal.com/detailing/pictures/highlander/ssr3_haze_side.jpg
Here is the hazing left from SSR3 up close:
http://melncal.com/detailing/pictures/highlander/ssr3_haze.jpg
Here is after PO85RD - polishing pad:
http://melncal.com/detailing/pictures/highlander/ssr3_po85rd.jpg
Here is another before and after:
http://melncal.com/detailing/pictures/highlander/bna_01_before.jpg
http://melncal.com/detailing/pictures/highlander/bna_01_after.jpg
This was a 2 day process and here it is after UPP and Souveran paste wax:
http://melncal.com/detailing/pictures/highlander/_DSC9850.jpg
http://melncal.com/detailing/pictures/highlander/_DSC9841.jpg
http://melncal.com/detailing/pictures/highlander/_DSC9837.jpg
http://melncal.com/detailing/pictures/highlander/_DSC9836.jpg
http://melncal.com/detailing/pictures/highlander/_DSC9830.jpg
http://melncal.com/detailing/pictures/highlander/_DSC9831.jpg
Not a 100% perfect...but a 100% better!