01bluecls
03-04-2007, 03:11 PM
My first MAJOR detail of the season. I have about 7-8 scheduled in the next two weeks. :)
Just finished up on a 13 hour detail over the course of yesterday and this morning. It’s a 1994 Toyota Supra TT in single stage black. Soft paint but a lot of little scratches all over and some deeper swirls. Owner wanted a full detail.
Process:
Engine – Greased lightening degreaser, spray down, dressed rubbers/plastics
Interior – Vacuumed, Leather cleaned with Lexol, dressed with Z10, rubber vinyl dressed with 303. Capets cleaned with folex.
Exterior –
Wash - Zaino wash with foam gun, and clay with meg`s clay
1/3 of the car’s areas/panels was done by EC with Yellow cutting pad @ 1700rpms.
The whole car got Menzerna IP with orange cut pad @ 1500rpms
Menzerna 106FF with white polish pad @ 1500 rpms finished off @ 1200rpms.
Applied RMG via PC and finish pad at 4.
LSP by hand was Pinnacle Souveran.
Tires dressed with Mothers FX along with lower exterior trim.
Total Process took about 13 hours. I will let the pics do the rest of the talking. Comments or questions as always.
Before Driver Quarter Panel
http://www.autopia.org/gallery/data/500/Before_Supra_Quarter.jpg
After Driver Quarter Panel
http://www.autopia.org/gallery/data/500/After_Supra_Quarter.jpg
Before Driver`s Door
http://www.autopia.org/gallery/data/500/Before_Drivers_door.jpg
After Driver`s Door
http://www.autopia.org/gallery/data/500/After_Drivers_Door.jpg
Before Hood
http://www.autopia.org/gallery/data/500/Before_Hood1.jpg
After Hood (The sun went down after I had finished the hood, changing the lighting hence the different color of the hologens reflections.)
http://www.autopia.org/gallery/data/500/After_Hood1.jpg
Just finished up on a 13 hour detail over the course of yesterday and this morning. It’s a 1994 Toyota Supra TT in single stage black. Soft paint but a lot of little scratches all over and some deeper swirls. Owner wanted a full detail.
Process:
Engine – Greased lightening degreaser, spray down, dressed rubbers/plastics
Interior – Vacuumed, Leather cleaned with Lexol, dressed with Z10, rubber vinyl dressed with 303. Capets cleaned with folex.
Exterior –
Wash - Zaino wash with foam gun, and clay with meg`s clay
1/3 of the car’s areas/panels was done by EC with Yellow cutting pad @ 1700rpms.
The whole car got Menzerna IP with orange cut pad @ 1500rpms
Menzerna 106FF with white polish pad @ 1500 rpms finished off @ 1200rpms.
Applied RMG via PC and finish pad at 4.
LSP by hand was Pinnacle Souveran.
Tires dressed with Mothers FX along with lower exterior trim.
Total Process took about 13 hours. I will let the pics do the rest of the talking. Comments or questions as always.
Before Driver Quarter Panel
http://www.autopia.org/gallery/data/500/Before_Supra_Quarter.jpg
After Driver Quarter Panel
http://www.autopia.org/gallery/data/500/After_Supra_Quarter.jpg
Before Driver`s Door
http://www.autopia.org/gallery/data/500/Before_Drivers_door.jpg
After Driver`s Door
http://www.autopia.org/gallery/data/500/After_Drivers_Door.jpg
Before Hood
http://www.autopia.org/gallery/data/500/Before_Hood1.jpg
After Hood (The sun went down after I had finished the hood, changing the lighting hence the different color of the hologens reflections.)
http://www.autopia.org/gallery/data/500/After_Hood1.jpg