PDA

View Full Version : Best AIO Product



Darren F
02-03-2007, 02:27 PM
Which is the best AIO product that will remove minor swirls on a black car that can be applied by hand?

wannafbody
02-03-2007, 02:33 PM
there are many AIO type products that work well. Polyseal, Poorboys polish w/sealant, Jeff`s Werkstatt and the new Zaino AIO. Most will work similarly.

imported_smprince1
02-03-2007, 02:49 PM
When I need a little correction with protection, I like Hi-Temp Paint Perfection as a 1-step.

Milestones
02-03-2007, 02:58 PM
Werkstatt Prime Strong gets my vote.

BMW335i
02-03-2007, 03:20 PM
WS: Prime is a very gentle, yet effective AIO. It actually does remove very minor marring (key word, minor).



WS: Prime Strong is 120% version of Prime. I would go with this one in the end.



~ While you`re at it, I would buy some WS: Acrylic Jett Trigger. Awesome product that cannot be any easier to apply.



For other, non WS AIO`s, Autoglym SRP is very good also.

imported_smprince1
02-03-2007, 05:26 PM
I own Prime Strong ... but I wouldn`t think it would be effective on swirls.



What is your experience? Are you able to remove swirls with Strong?

wannafbody
02-03-2007, 06:04 PM
AIO`s aren`t swirl removers. I`d suggest a finishing polish or Sonus Swirlbuster

BigJimZ28
02-03-2007, 06:30 PM
When I need a little correction with protection, I like Hi-Temp Paint Perfection as a 1-step.





yep , I also vote HT-69!

this product will remove swirls,

and add protection for a few months!

it is cheap and easy to use

beastie
02-03-2007, 06:30 PM
I use Klasse AIO with a white polishing pad and a PC and it will remove minor swirls. Klasse (or their vendors) doesn`t make that claim officially. I didn`t have much trouble removing swirls on my Mazda`s paint but my black Lincoln LS was another story. It`s apparently harder paint needs more polishing power than just Klasse AIO. If doing by hand, look somewhere else.

Scottwax
02-03-2007, 06:47 PM
Optimum Poli-Seal will remove light defects and leaves a carnauba like finish.

AL-53
02-03-2007, 06:49 PM
yep , I also vote HT-69!

this product will remove swirls,

and add protection for a few months!

it is cheap and easy to use





I agree....HT-69..Paint Perfection is a good product...I use it on the Dump Trucks I do every winter...some times I mix a little HT-300 in a bottle with HT 69 to get some extra cut..it really does a nice job...and finishes out real nice...HT-69 is a combo of lite cut polish and a sealant..it is a very good AIO...and cheap as said above..also can be topped with another sealant if wanted...I have used DG 105 over it and it looked great



Al