View Full Version : What autopians like to use.
ConglomrationAL
01-14-2007, 10:54 PM
I wanna know what polish anyone on here would recommend for swirl removal. I`ve heard many good things about Poorboy`s SSR and Menzerna polishes.
What do you guys think?
Juztang
01-14-2007, 10:57 PM
Poorboys work really good but tend to dust. My go to polish line is Optimum. The Optimum doesn`t dust and can be worked in longer than most polishes. Menzerna is very popular on here too.
BigJimZ28
01-14-2007, 11:04 PM
I think you will be happy with any of the three that were
talked about above
I have only use the ssr and yes it does dust some but it works well
Thomas Dekany
01-14-2007, 11:11 PM
pc or rotary?
ConglomrationAL
01-14-2007, 11:13 PM
PC. Would Sonus SFX pads be the best for the job?
Thomas Dekany
01-14-2007, 11:23 PM
to me for the pc, the best pads are the 7.5" lc vc pads - if you use speed 6.
imported_rydawg
01-15-2007, 01:02 AM
menzerna ip and 106ff... the best of the best
ConglomrationAL
01-15-2007, 07:51 AM
Awesome. Menzerna it is, i only want to use the best.
ConglomrationAL
01-15-2007, 08:25 AM
Lake Country 7.5 Inch Curved Edge Full Contact Foam Pads - Makita Polishers And Accessories (http://www.detailcity.com/lake-country-7-5-inch-curved-edge-full-contact-foam-pads.html)
Check this link to see if these are the LC pads that would be recommended. Thanks.
coupe
01-15-2007, 09:10 AM
I wouldnt use pads that are bigger than 6.5".
I preffer between 4" and 6" pads.
joe.p
01-15-2007, 09:56 AM
I have the LC 7".5" CV pads..I use them with my Makita and PC..as long as the poster upgrades his Counter weight on his PC the pads work just fine..
budman3
01-15-2007, 10:11 AM
Lake Country 7.5 Inch Curved Edge Full Contact Foam Pads - Makita Polishers And Accessories (http://www.detailcity.com/lake-country-7-5-inch-curved-edge-full-contact-foam-pads.html)
Check this link to see if these are the LC pads that would be recommended. Thanks.
Those would be them... the durability of these are 10x better than most other pads...
My other products I like:
Wash- NXT
Clay- No comment... the good stuff is gone
Polish PC- Poorboys SSRs
Polish Rotary- Optimum
Sealant- UPP, Wolfgang, Poorboys EX-p, Klasse SG
Wax- Natty`s or P21S (S100)
Spray wax- OCW
Glass cleaner- Invisible Glass
Interior Protectant- Megs #40, PB Natural Look
Tire Shine- Megs Hot Shine
Wheel Cleaner- Eagle 1 Tire and Wheel Cleaner
Waterless wash- PB Spray and Wipe
Those are most of the products that you`d see me using the most...
SpoiledMan
01-15-2007, 10:24 AM
Menzerna polishes are on my first to grab list.
I have the LC 7".5" CV pads..I use them with my Makita and PC..as long as the poster upgrades his Counter weight on his PC the pads work just fine..
Changing the counter weight has no change on the operation with various pads. The PC CW was designed for using sand paper discs and not foam pads.
porta
01-15-2007, 10:24 AM
Menzerna PO85RD3.02 and either PO106FF or PO85RE5.