View Full Version : ClearKote Red Moose application ?
AngieD
11-29-2006, 05:25 PM
I was just wondering what speed on the pc you put this on with and what pad to use? Do you let it break down like a polish? Thanks!
Glossmaster
11-29-2006, 05:40 PM
Some opinions may differ, but I use a finishing pad & a speed of 1500rpm with RMG. I use it as a pure glaze since it contains no abrasives. Works great on my black paint!
AngieD
11-29-2006, 05:54 PM
So what speed would that be on the Porter Cable?
DM101
11-29-2006, 07:12 PM
I use 3.5 ..... Works for me.
Scottwax
11-29-2006, 07:30 PM
I use it with a blue Propel finishing pad via PC and a speed of 5. 3-4 passes at a moderate speed (4-5 inches per second) and it seems to melt into the paint.
03TLS
11-29-2006, 07:51 PM
^^CO-SIGN what he said.
Envious Eric
11-29-2006, 09:13 PM
I use it with a blue Propel finishing pad via PC and a speed of 5. 3-4 passes at a moderate speed (4-5 inches per second) and it seems to melt into the paint.
same....at speed 6 it almost dissapears too quickly after one pass....i use it on a green german polishing pad from classic motoring accessories
RCBuddha
11-29-2006, 09:58 PM
I like to use RMG @ speed 2 with a soft finishing pad on a PC.
dudemandanman
12-09-2006, 06:45 PM
would a white polishing pad be too aggresive?
imported_ChrisNJ
12-09-2006, 08:15 PM
I use a white edge pad w/ it @ spd 4.
Scottwax
12-09-2006, 08:36 PM
would a white polishing pad be too aggresive?
Probably not.