Recommendation for a newbie!!

[darkness2505]

Hi all,



These past 2 days I`ve been lurking around the forums. I have no knowledge or experience to car detailing whatsoever, so any input is welcome. I have a white audi a4 and a metallic tealish bmw. I was wondering if the products + steps are correct?

I am going to do all of by hand, since i do not have money for a PC.



Wash with Meg`s GC

Claybar

Klasse AIO

PB EX-P

Natty`s Blue/Meg #26/Meg Nxt paste

Clearkote QS



Also, some questions:

Normal Natty`s or Natty`s blue?

From what I`ve read Meg`s NXT paste will take away PB EX-P? So should i just stick with Natty`s Blue + Meg #26? Which should be LSP?



Is Meg`s Professional Clay Bar a good claybar?





Thanks!!:ca

[Eliot Ness]

.....Also, some questions:

Normal Natty`s or Natty`s blue?

From what I`ve read Meg`s NXT paste will take away PB EX-P? So should i just stick with Natty`s Blue + Meg #26? Which should be LSP?



Is Meg`s Professional Clay Bar a good claybar?.....Your process looks good as long as you aren`t wanting to remove any swirls or defects. There are some light swirl removers like SSR1 you can use by hand if you want to add that step after the clay.



Use regular Natty`s on light colors and the blue on darker colors. NXT does have some mild cleaners so I`d just stick with the Natty`s or #26 on top of EX-P.



You might want to do EX-P x 2 (with 12-24 hours between applications) and then apply the Natty`s after the second layer of EX-P has cured a bit.



The Meg`s clay should be fine if it is the mild (http://www.meguiars.com/?pro-auto-detailing-clay/Detailing-Clay-Mild) type.