Infiniti Clearcoat

[Heikes]

Hey guys/girls, I have some pretty obvious spider-webbing on a Lazer Red G35. I`m told that the clear on Infiniti`s is notoriously soft. I scuffed the clear once with a plastic shopping bag. Nice thing is that it`s easy to get out these minor marks. My question is if I should even try using Meg`s #7, or should I go with #9. I`ll be using a PC with a yellow pad. Unless you tell me otherwise. I do have DACP #83 coming, but it wasn`t intended for my car, I could use it, but I was thinking too abrasive. What I am planning is #9, then #7, then FK pink wax. Any objections or suggestions are welcomed. Thanks!

[Bigpoppa3346]

#9 is primarily fillers and will do hardly, if any correction, even on soft paints. #7 is completely non-abrasive and is generally a PITA to use. I`d say go with #83(if needed), #80 or #82, then FK Pink. Having a soft clear doesn`t mean that ultra mild products will correct significant defects.

[Heikes]

Alright, that`s good info. So should I use #83 then a #9 then the wax?

[Bigpoppa3346]

#83, then #9 then wax. However, wax durability might be reduced due to the heavy oil content of the Meg`s polishes.

[Heikes]

Then it would be advantagous for me to do more coats than usual, right?

[imported_Frugle]

maybe if you use the proper wax and allow the proper cure time between coats. (depends on temperature and wax)