whitejavaS500
11-06-2006, 10:01 PM
Well, snow is near, and snow means salt, and salt means a need for protection. So this year I went with EX-P topped with my own creation, "Natty`s Sky" (50% Natty`s White & Natty`s 50% Blue)on the Bimmer and Werkstatt`s topped with P21s on the Range. Looked great, and should be plenty of protection at least through Feb.
First up, The Rover.
Got this truck in July, did a full polishing then with the PC, so decent shape.
Just hit it with OP On a green EDGE 2000 light cut pad @ 1600 RPMS
Then spritzed with QD and finished down with a blue EDGE 2000 Finishing pad at 1500 RPMS
Next AJ on PC with an LC blue on 3 x2
Topped with a layer of P21S
Megs Endurance HIGH GLOSS on tires
303 On trim
ArmorAll in wells
http://i26.photobucket.com/albums/c141/ben812/11-5-06014.jpg
http://i26.photobucket.com/albums/c141/ben812/detail/11-5-06022.jpg (http://s26.photobucket.com/albums/c141/ben812/detail/?action=view¤t=11-5-06022.jpg)
http://i26.photobucket.com/albums/c141/ben812/detail/11-5-06023.jpg (http://s26.photobucket.com/albums/c141/ben812/detail/?action=view¤t=11-5-06023.jpg)
And My Favorite-
http://i26.photobucket.com/albums/c141/ben812/detail/11-5-06017.jpg (http://s26.photobucket.com/albums/c141/ben812/detail/?action=view¤t=11-5-06017.jpg)
Next up is the 330
I LOVE this car. Rides a little hard, but handles better than most cars out there. Bought this in July too, and have only done a Clay-Glaze-Wax since then. Now it was time to tackle the Dealer installed swirls.
Process:
ONR
Clay Poly clay
EC/OP On EDGE 2000 Orange @1900 RPMS
OP On EDGE 2000 Green @ 1700 RPMS
OP on PC White Pad Speed 6
EX-P by hand, 30 min between, 2 coats
Nattys SKY
Rims-
Remove, scrub with WB 2:1
PB`s Wheel Sealent x4
TOL Tire Cleaner
Meg`s Endur. High Gloss x2
I think she came out good--
Before--
http://i26.photobucket.com/albums/c141/ben812/10-16-06019.jpg
First up, The Rover.
Got this truck in July, did a full polishing then with the PC, so decent shape.
Just hit it with OP On a green EDGE 2000 light cut pad @ 1600 RPMS
Then spritzed with QD and finished down with a blue EDGE 2000 Finishing pad at 1500 RPMS
Next AJ on PC with an LC blue on 3 x2
Topped with a layer of P21S
Megs Endurance HIGH GLOSS on tires
303 On trim
ArmorAll in wells
http://i26.photobucket.com/albums/c141/ben812/11-5-06014.jpg
http://i26.photobucket.com/albums/c141/ben812/detail/11-5-06022.jpg (http://s26.photobucket.com/albums/c141/ben812/detail/?action=view¤t=11-5-06022.jpg)
http://i26.photobucket.com/albums/c141/ben812/detail/11-5-06023.jpg (http://s26.photobucket.com/albums/c141/ben812/detail/?action=view¤t=11-5-06023.jpg)
And My Favorite-
http://i26.photobucket.com/albums/c141/ben812/detail/11-5-06017.jpg (http://s26.photobucket.com/albums/c141/ben812/detail/?action=view¤t=11-5-06017.jpg)
Next up is the 330
I LOVE this car. Rides a little hard, but handles better than most cars out there. Bought this in July too, and have only done a Clay-Glaze-Wax since then. Now it was time to tackle the Dealer installed swirls.
Process:
ONR
Clay Poly clay
EC/OP On EDGE 2000 Orange @1900 RPMS
OP On EDGE 2000 Green @ 1700 RPMS
OP on PC White Pad Speed 6
EX-P by hand, 30 min between, 2 coats
Nattys SKY
Rims-
Remove, scrub with WB 2:1
PB`s Wheel Sealent x4
TOL Tire Cleaner
Meg`s Endur. High Gloss x2
I think she came out good--
Before--
http://i26.photobucket.com/albums/c141/ben812/10-16-06019.jpg