First Try with the PC...Reccomendations? (Pics)

[EOppie]

So first try at the PC today...here is what I did:



Wash with GC

Clay with Mothers CG



Polish with White Pad and OP

Thats it so far....I ran out of daylight. Tomorrow I plan to finish polishing the panels, and may hit them again as there are a few things I noticed I need to work out. I then plan to do AIO and then a few layers of SG on top.



Question...what pad should I use for the AIO and the SG? I removed the OP today by hand. I apologize for a lack of after pics...I will post some tomorrow AM before I start work again.



I still have some light swirls on the door panels, as well as the scratches pictured need to be removed. I also have this weird white discoloration near the rear of the vehicle in front of the rear tires on both sides...claying didn`t remove it. Can I polish these panels with OP even though they are plastic?



Thanks!



http://www.omediaproduction.com/hostimages/Autopia/Car%20Pics/DSC00259.JPG

http://www.omediaproduction.com/hostimages/Autopia/Car%20Pics/DSC00263.JPG

http://www.omediaproduction.com/hostimages/Autopia/Car%20Pics/DSC00266.JPG

http://www.omediaproduction.com/hostimages/Autopia/Car%20Pics/DSC00271.JPG

http://www.omediaproduction.com/hostimages/Autopia/Car%20Pics/DSC00273.JPG

After Washing

http://www.omediaproduction.com/hostimages/Autopia/Car%20Pics/DSC00276.JPG

Etching of some kind