View Full Version : Need Help with Corvette
jjohn918
08-17-2006, 12:17 PM
Hey all! I`ve got an `07 Corvette that I need to do some work on. I`d like to know what pad and product you would use with a PC to get out 1500/2000 grit hazing after sanding. Thanks!
Joshua312
08-17-2006, 12:25 PM
Hey all! I`ve got an `07 Corvette that I need to do some work on. I`d like to know what pad and product you would use with a PC to get out 1500/2000 grit hazing after sanding. Thanks!
After wetsanding with those grits on such hard clear I would probably use Hi-Temp Extreme Cut/Optimum Polish Mix then follow it with something like Blackfire Finishing polish. Via PC though Im not sure how effective the Extreme Cut will be, especially on vette clear :nixweiss Why wetsanding on a 07 Vette? :(
jjohn918
08-17-2006, 12:35 PM
Some deep scratches were put in it by an install guy.
Joshua312
08-17-2006, 12:39 PM
Make sure you put on the touch up paint nice and heavy so you can sand down the glob nicely if they can be felt with your fingernail. If they arent that deep I would start with 3000 grit Ive had good success with it removing some scratches, it takes a couple more passes, but its safer IMO