New question I am confused

[ChicagoVTX]

Ok I am confused on products /steps :nervous2: .



I have washed, clayed, polished with PB2.5 and 1, after the polish I used wolfgang precleaner polish enhancer.This is where I got confused, "do I need to glaze at this point?". or do I go straight to the sealant?. was the precleaner even a necassary step :confused:

[wannafbody]

use the precleaner then the sealant

[ChicagoVTX]

So after I finish polishing I should have used the precleaner and not bother with using a glaze?

[kpounds]

The pre-cleaner would probably remove the glaze, so pre-cleaner before the glaze. To use the glaze or not is your choice. Its not mandatory, but glazes usually add some "pop" or extra depth to the final look, sometimes they REALLY make a big difference. If you have the glaze already - I would use it to get the maximum shine possible - then a wax or sealant for the last step.



The pre-cleaner (if its like most pc`s) is a very light polish. You probably didn`t need it since you used PB1, but it won`t hurt anything and might have improved it a bit.