PDA

View Full Version : seperate 845



Brian_Brice
06-21-2006, 02:55 PM
ok it got really hot then really cold ive shaken the crap out of it all i still have is melted milkshake only runnier. dont use? oh its collinite 845 btw. oh and ive also tried putting it in my cooler, should i put it in my freezer?

Bigpoppa3346
06-21-2006, 03:00 PM
Try using a hair dryer on a low heat setting to get it to a nice and warm temperature, not too hot or cold. Don`t just shake, but rock it back and forth. For me it takes several minutes of shaking to get it unseparated, but it works. Dont freeze it, that might make it worse.

Brian_Brice
06-21-2006, 03:04 PM
do you get it back to its sludgy like originalality this way?

wannafbody
06-21-2006, 03:33 PM
my 845 seperates sitting inside. Just a shake and it`s good to use. Over the last 2 years mine has thinned out quite a bit.

imported_Bence
06-21-2006, 05:03 PM
845 supposed to have a thin, runny consistency.

imported_SHICKS
06-21-2006, 05:12 PM
Mine was very thick when I first bought it, but now it`s pretty liquid. I just shake, shake, shake.



Steve

Brian_Brice
06-21-2006, 06:17 PM
845 supposed to have a thin, runny consistency.



lol well then i wanna know why a shop sold me some thick sludgy 845 goshdarnit

imported_Bence
06-21-2006, 06:22 PM
Initially all 845s are thick, and close to immovable. As you screw down the cap, you see basically a wax plug in the bottle, with very little air. No problem. Just SHAAKEEE!!!!!!! As Bigpoppa said correctly, rock it back and forth!!! You`ll need brute force; not just a slight shake.



You`ll be surprised, as it suddenly thins out!

Brian_Brice
06-21-2006, 06:32 PM
thanks for clearing that up my 845 is fine just fine

derek37
06-21-2006, 08:05 PM
cool info; i was just going to post a new question on what the consistency was supposed to be like.

When i got mine the first thing i thought of was "it`s like applesauce only thicker"

SO...shake shake shake until it thins correct?

imported_Bence
06-21-2006, 08:08 PM
Yep, correct!