TR3 Resin Glaze

[BmX]

Im a detailing noob and i need to know how to use this. It says to wipe with a cloth intill you see the glaze showing on the car. Than it says let the polish CURE for 2 hours, than remove the flim with a clean cloth.



Now what exactly does that mean? Do i let the car sit with the white glaze showing for 2 hours. (like its doing right now)





or do i



Get a cloth and buff it shiny clean than let it sit for 2 hours?





Also after this sit is ok if i threw on a coat of turtle wax to shine it up even more?

[Wasatch]

I used this stuff back in the early 80`s on my 240Z. Put it on the whole vehicle wait 2 hours then remove.

[BmX]

Is it okay to use a paste wax after the TR3 cures?

[Wasatch]

I would wait 12-24 hours later, too top.

[BmX]

I would wait 12-24 hours later, too top.





WAit 24 hours for the whole thing to cure even after i buffed it? I already hand buffed the white layer off and now it feels smooth and slickly :shocked :bow . So you think i should wait 24 hours still after i already hand buffed it?

[imported_steveo3002]

yes wait another 24 hrs before waxing