Rotary pad ?

[Driven-528e]

For those experienced rotary users out there, are foam pads (such as LC VC pads) safer to use than a wool pad?

If so, to what extent are they safer?

Can they achieve the same or similar results as a wool pad?





I want to make the step up to the rotary but am very aprehensive and want to start out as gentle as possible, but still get quicker results than with a PC. My goal is to practice extensively before putting it to use...



I am planning on using LC VC 8.5" foam pads to start out with.
http://www.topoftheline.com/85lakcounfoa.html Are these good pads for a beginner rotary user?



Any help/advice will be greatly appreciated!

[gmblack3]

Closed foam pads build up more heat then wool or waffle foam. There is little to no air under the closed foam pads. If you use a softer closed foam pad it will still build up some heat, but not as much as the "heavier cut" pads.

[Driven-528e]

Thanks for the response!



Also, do you have a size recommendation?

[gmblack3]

I use the same foam on rotary that I do on the PC. excel detail.

[holland_patrick]

look in the good deal theads and you can see my pads for sale