Slightly more agressive than Menz IP?

[steveAZ]

I`m looking for the next step in agressiveness after trying Menz IP? I`ve been using a DP orange pad. Just looking for the next level to clean up my older truck. I`ll be using a PC. The IP didn`t clean up all the swirling / light scratching.



Thanks.

[gmblack3]

At what speed are you using the PC now with IP? Maybe you could try making slower/higher pressure passes? What kind of truck is it?

[imported_themightytimmah]

IP is edging towards the upper limits of whats achievable with a PC. However, Optimum Hyper Compound will do the trick, if you follow up with a good finishing polish.

[Alfisti]

#83 is more aggressive than IP and is still PC-friendly.



As suggested above, you can try IP again but alter your technique. Also, with some marring multiple passes are required to remove them, regardless of polish used.

[Accumulator]

You might look into the Hi-Temp line at TOL or consider 1Z`s Ultra/Extra Polish.



But IMO the best way to up the aggressiveness of the PC is to use it with 4" pads. They make such a difference that you actually have to be a little careful.