FK 2180 with the PC

[Vegas1]

After already laying down 2 coats of 2180 by hand I decided to apply one more coat with the same method I use to apply Zaino. With a PC.



I`ve always had a tough time laying down thin even coats even though I always try to not use too much product.



I used a LC black finishing pad and just misted the pad with some 425. From my years of using Zaino with the PC, a little really does go a long way. Laying down 2 very short thin strips on the pad I was ready to go. With the PC set at 2.5 I was done before you know it.



I did half of the car and then went back to buff off. Since I have a light silver car,the haze could barely be seen, but came off so easily it was scary. Needless to say when I apply more coats down the road the PC is the way to go.



Now to try my sample of Pink Wax.

[-KGB-]

The only LSP I do not apply with the PC are carnubs. PC rocks for everything I have used minus Zaino

[uzj100]

Wonder if this might also be a good way to apply FX 100?

[pt91]

I also apply 2180 by machine (slow, finishing pad) but use a MF applicator to apply FX-100.

[imported_Bence]

Excellent way to do it!!!

[Vegas1]

Wonder if this might also be a good way to apply FX 100?





Think I might give this method a try once my FX 100 arrives. It`s worth a shot.

[Nobuff2tuff]

anyone know (Bence), if fx100 applied with pc exhibits the same scratch hidding capability of lets say Vanilla Moose ?

[imported_Bence]

I`ve never used VM, so I can`t comment on that. FX-100 doesn`t hide much. It responds very well to the PC application, but I can`t compare it to the CK stuff - no experience.

[klnyc]

Hi,



If you mist 425 on the pad and apply 2180 on the finish black pad. Wont this have any bonding issue? Does 425 have any solvent in it? I asked, `cuz I just got my 1 gallon of 425 :getdown last night.

[LynchMOB]

I do not believe 425 has any solvent properties... in fact on some directions FK recomends using FK to moisten application pads.

[DM101]

I use 425 mist with Pinnicle Souveran. Goes on well and removes well also. I like it cause it leaves the car a little slicker. I can`t tell if its not bonding because the car is already at it`s max shine and depth.








Hi,



If you mist 425 on the pad and apply 2180 on the finish black pad. Wont this have any bonding issue? Does 425 have any solvent in it? I asked, `cuz I just got my 1 gallon of 425 :getdown last night.

[Vegas1]

... in fact on some directions FK recomends using FK to moisten application pads.



That`s exactly why I did it, and it worked great.