Gen2
03-14-2006, 08:49 AM
This sporty baby is around 1 year plus old and it has accumulated quite a bit of swirls on it. Beside this, there seems to have some stains (could be overspray) on the body too. Below are 2 pics showing the swirls and the stains I am referring to and the photos were taken after the wash and clay (looks like even the clay could not remove the stain)
Swirls
http://i38.photobucket.com/albums/e102/atpower/A1P2110027_1.jpg
Swirls with blurriest stain
http://i38.photobucket.com/albums/e102/atpower/A2P2110029_1.jpg
The defect removing process,
1) PG + cutting pad + DA @ speed 5
2) IP + light cutting pad + DA @ speed 5
3) FP + polishing pad + DA @ speed 4
After
http://i38.photobucket.com/albums/e102/atpower/A3P2110033.jpg
The finishing steps,
1) Prime + finishing pad + DA @ speed 3 (set in for 30 mins)
2) Acrylic Jett 1 coat by hand
And I am proud to present this fierce and sporty RX8,
Front view
http://i38.photobucket.com/albums/e102/atpower/B1P3120010_2.jpg
http://i38.photobucket.com/albums/e102/atpower/B2P3120008_1.jpg
http://i38.photobucket.com/albums/e102/atpower/B3P3120030_2.jpg
At a lower angle,
http://i38.photobucket.com/albums/e102/atpower/B3P3120032_2.jpg
Swirls
http://i38.photobucket.com/albums/e102/atpower/A1P2110027_1.jpg
Swirls with blurriest stain
http://i38.photobucket.com/albums/e102/atpower/A2P2110029_1.jpg
The defect removing process,
1) PG + cutting pad + DA @ speed 5
2) IP + light cutting pad + DA @ speed 5
3) FP + polishing pad + DA @ speed 4
After
http://i38.photobucket.com/albums/e102/atpower/A3P2110033.jpg
The finishing steps,
1) Prime + finishing pad + DA @ speed 3 (set in for 30 mins)
2) Acrylic Jett 1 coat by hand
And I am proud to present this fierce and sporty RX8,
Front view
http://i38.photobucket.com/albums/e102/atpower/B1P3120010_2.jpg
http://i38.photobucket.com/albums/e102/atpower/B2P3120008_1.jpg
http://i38.photobucket.com/albums/e102/atpower/B3P3120030_2.jpg
At a lower angle,
http://i38.photobucket.com/albums/e102/atpower/B3P3120032_2.jpg