imported_GBG TL
02-19-2006, 02:16 PM
2004 Acura MDX: Done with mgm121499 on Friday night.
After using Z on my wife’s paint for 6+ weeks, I decided to try it on the MDX. The MDX was topped with FMJ before we switched over to Z.
Process Used:
Wash: CG’s Body Wash
Tires/Rims: CG’s Blue APC
Dry: Big Blue WW
Paint Prep:
ZPC x 1 via PC @ 4.5 using a LC finishing pad
Seal: (Done in heated garage 75 degrees. 15-20 min between coats. Z2Pro cured for 12 hours before final wipe down).
Paint:
Z5 x 2
Z2 pro x 1
Z8 wipe down
#425 clean up. (#425 seems to work well with Z)
Wheels:
Poorboys WS (applied 1 week ago). We topped the wheels with Z5.
After Shots:
Tires:
http://i5.photobucket.com/albums/y189/mgm121499/MXD-Z-FEB/100_0667.jpg
Paint:
http://i5.photobucket.com/albums/y189/mgm121499/MXD-Z-FEB/100_0661.jpg
http://i5.photobucket.com/albums/y189/mgm121499/MXD-Z-FEB/100_0652.jpg
http://i5.photobucket.com/albums/y189/mgm121499/MXD-Z-FEB/100_0654.jpg
Full Sun: If this isn’t some ‘pop’ on the paint, I don’t know what is!! :drool:
http://i5.photobucket.com/albums/y189/mgm121499/MXD-Z-FEB/100_0656.jpg
Z Impressions:
-Does not like cold weather. The final coat of Z2Pro cured in below freezing temps, and it was a little difficult to remove, and Z8 would streak. The paint was COLD. In temperatures above 50 degrees –no problems.
-Z is my new sealer of choice. I’ve used it 3 times, and love it.
After using Z on my wife’s paint for 6+ weeks, I decided to try it on the MDX. The MDX was topped with FMJ before we switched over to Z.
Process Used:
Wash: CG’s Body Wash
Tires/Rims: CG’s Blue APC
Dry: Big Blue WW
Paint Prep:
ZPC x 1 via PC @ 4.5 using a LC finishing pad
Seal: (Done in heated garage 75 degrees. 15-20 min between coats. Z2Pro cured for 12 hours before final wipe down).
Paint:
Z5 x 2
Z2 pro x 1
Z8 wipe down
#425 clean up. (#425 seems to work well with Z)
Wheels:
Poorboys WS (applied 1 week ago). We topped the wheels with Z5.
After Shots:
Tires:
http://i5.photobucket.com/albums/y189/mgm121499/MXD-Z-FEB/100_0667.jpg
Paint:
http://i5.photobucket.com/albums/y189/mgm121499/MXD-Z-FEB/100_0661.jpg
http://i5.photobucket.com/albums/y189/mgm121499/MXD-Z-FEB/100_0652.jpg
http://i5.photobucket.com/albums/y189/mgm121499/MXD-Z-FEB/100_0654.jpg
Full Sun: If this isn’t some ‘pop’ on the paint, I don’t know what is!! :drool:
http://i5.photobucket.com/albums/y189/mgm121499/MXD-Z-FEB/100_0656.jpg
Z Impressions:
-Does not like cold weather. The final coat of Z2Pro cured in below freezing temps, and it was a little difficult to remove, and Z8 would streak. The paint was COLD. In temperatures above 50 degrees –no problems.
-Z is my new sealer of choice. I’ve used it 3 times, and love it.