- Washing wool pads ???
- Polish
- Help on paint...
- pad life
- Cyclo > Flex ; + my Flex burnt my paint =(
- Metabo PE 12-175 Versus Flex 3403 or larger Makitia/Dewalt/Flex
- M105/M205 ... then what?
- Porter Cable Polisher Vibrates Uncontrollably
- flex 3401 smaller backing plate
- oxidation removal from plastic
- Want The Edge adapter for Makita D/A
- If you didnt buy a pad cleaning brush...
- LC 3.5" backing plate
- I want flat pads!
- 3-4 inch Backing Plates work on G110?
- Rotary Buffing the correct way??
- Any pointers for first time using SIP
- Technique - ok?
- Using a DA on VentureShield (Clear Bra)
- Deep Scratches
- Power Finish
- Random thoughts on pad selection
- Finish quality: rotary vs da
- New Meguiar`s Kits
- Need some help
- NEW! PUMP your PC or Flex UP with the ONLY OFFICAL KEVIN BROWN METHOD KITS!!!
- A little info for new product purchase.
- Pad question Cyclo/Edge vs LC
- Adjust cut/agressivness with pad or polish?
- Gloss it and cyclo correction
- Minimum needed for paint correction
- Correction with a PC
- UDM question...
- Propel PC Pads questions??
- Flat Vs. Grooved/dimples pads?
- Noob Purchase Checklist
- *Review* Meguiar`s Soft Buff 2.0 Pads!!
- Need help with polishes...
- PO 85rd
- help!!!!!
- I messed up big time
- LC orange CCS pad - question
- MENZERNA GIVEAWAY: Own a piece of history!
- Need to purchase new pads... advice needed
- Which is the best bang for the buck?
- Recommendation on stronger Scratch Remover for PC
- PC and correction
- A new look for our current 16 oz Menzerna bottles and a FREE giveaway!
- Flex question
- what two machine tools to buy