- Is IP/#83 on PFW followed by FP/#80 too big a jump on Acura paint?
- Which pad is better for scratch removal?
- ** How does this setup sound? **
- swirls under clear??
- Pads?
- CCS pads or Flat pads?
- Menz question
- backing plate for 6.5" PFW
- Flex 3401
- Forced rotation or RO? - Makita BO6040
- PC vs Flex 3401 for Beginner?
- Where`s the best place to buy a Flex DA?
- Need some help with LC CCS Pads...
- Corvette, cyclo, 1z product lineup?
- PC Quandary
- It aint going clear!
- Where can I get these?
- Meguiar`s Solo kit w/ PC 7424?
- Is my new PC damaged/defective??
- Tips for new Makita owner? yes ive read alot of threads lol!
- Trial and error for a new owner, got tips?
- Applying Zaino after PC polishing w/ SSR series: wash first?
- What`s the best process for Ceramiclear paint?
- Buying a new buffer.
- Scratch X/NuFinish
- Recommend a Megs more agressive than M83 for Cyclo?
- First timer setup - Waxing with PC7424 4" pads?
- PC and LSP ready
- Using SIP and 106FA, Ultrafina on swirl-free finish??
- polishing after painting-how long to wait?
- Rotary: How much heat is too much?
- Flex 3401
- What speed for PFW on
- Rotary/PFW Help
- Tips On Rotary Pads And Tips
- Getting the Maximum Gloss
- Rotary buffer brands
- swirls aren`t coming out, now what?
- question for moderators
- PC orbit radius.
- In middle of a detail - tried s34a, then 2000 grit wet sand; still no joy
- In middle of a detail - tried s34a, then 2000 grit wet sand; still no joy
- machine polishing an airplane
- Recommend a foam pad set for a newbie with a Makita?
- Looking for Edge 4 Inch Pads
- Getting ready to order 4" LC pads
- White Pad shipped with UDM
- New Flex Owner
- Used My Metabo For the First Time Awesome!
- 3m Perfect Backing Plate $9.95!!!!