- Wool pad in a nutshell??
- Polish/wax final 1-step
- What size pad do you use? (pc)
- First time with the PC..
- Should I get a Cyclo?
- Is the ultimate detail machine worth getting if I already have a ROB and Rotary?
- UDM test results
- The MAKITA Arrived!
- Makita inlcuded backing plate
- Backing Plates or Velcro Boots for Cyclo?
- Menzerna vs Optimum lines for UDM
- Having an issue...
- Polishing over vinyl lettering
- Edge pads scratching?
- First time with PC, how to improve?
- Help with `97 Black BMW
- How heavy is the pc?
- Finishing pad and polish..
- 04 Acura TL made me crazy!
- do you have to clean your pads after every use?
- pads and wax with the 7424
- some holograms coming back after a few days..
- Small, VERY quiet rotary?
- UDM & Megs 85 Diamond Cut
- Noob: Just orderded PC and looking for products
- Pad with UDM safe to use?
- Pat vs The Rotary
- PC + SSR2.5 and SSR1.0 = more swirls than before, help!!!
- product selection help for a BMW, please?
- My buffer just broked today =(
- Im quite excited...
- Green CCS + SIP = ok?
- PC 7424 coutnerweight
- how to tackle these scratches?
- holograms
- How fast/slow with rotary to remove swirls?
- swirl/scratch removing with cyclo
- Hello Autopia folks,
- First Attempt with Metabo - 35 Ford.
- ZCS:Should I have ZFX`d and done multiple coats of Z5
- Final ?s before I use the PC
- some help??
- Help! Upcoming Detail
- Will dried polish look like faded paint?
- Wool and RMG
- 5" polisher with 13K OPM and small throw
- Ordering some 4 or 5 inch pads..help...
- what products to get for paint correction
- 1st detail with PC, what polishes to use in what order
- Very Discouraged