Results 1 to 14 of 14
  1. #1
    Forza Auto Salon David Fermani's Avatar
    Join Date
    Aug 2004
    Location
    Troy, MI
    Posts
    12,534
    Post Thanks / Like

    3D AAT 502 Finishing Polish Replaces HD Adapt as the Ultimate 1 Step!!

    3D AAT 502 Finishing Polish Replaces HD Adapt as the Ultimate 1 Step!!

    That’s correct. As many have already been aware of HD Adapt being discontinued, there is a solution to the void in your product arsenal that may have started to take form. That void can now quite possibly come to a halt. Adapt was an incredible product that would level moderate to sometimes heavy defects all while leaving behind a very well balanced looking final finish. This product sparked the whole Adaptive Abrasive Technology that has really changed the way 3D/HD has enginnered their compounds and polishes. Many people seemed a bit frustrated when they found out that Adapt had been discontinued. And rightfully so. But, because of 3D’s constant momentum to keep their product offerings to a minimum, their newly developed AAT Finishing Polish can now take the place after Adapt’s passing. Coupled with the right pad, machine speed and paint type, you can once again level defects and leave a great glossy shine behind…all in 1 step!


    Here’s an example of the performance of AAT 502 Finishing Polish. 2011 Porsche 911 GT2RS. Extremely soft solid black paint with moderate paint defects. 3D AAT 502 Finishing Polish paired with 3D’s Dark Purple Foam Cutting Pad via short throw DA polisher. Because of the low paint thickness readings (which is typical of solid black 911’s), I choose the less aggressive route to correcting this surface. I felt that is wasn’t the best decision to use a dedicated compound with a heavy cutting pad (MF or wool) just to remove excessive amounts of unneeded paint to level away these defects. And I also didn’t want to be forced to use 2 different products and steps (compound and then polish). Instead, I chose a heavier type foam pad and a less aggressive polishing compound and 3D AAT 502.

    Before Video:
    https://www.youtube.com/watch?v=zmwU6-OvAQg
    https://youtu.be/zmwU6-OvAQg


    Process:
    The results after the 1st buffing cycle were very good (80% removal), but still needed additional correction. To achieve this I performed another session of back & forth/up & down passes (6 in all this time around) to finalize the removal of the existing defects. After that (as an added secret I’m sharing with you), I then blew off the polish residue build-up off my pad with compressed air, applied 1 small drop of AAT 502 to my pad and made 1 slow pass on low speed to further refine out any residual pad marring and built up an amazing final finish. I think the results speak for themselves.

    50/50:


    https://www.youtube.com/watch?v=6e9sySM9vQI
    https://youtu.be/6e9sySM9vQI




















    After:







    Metro Detroit`s leader in cleaning, preserving & perfecting fine automobiles!
    Likes grungy, WaxAddict, PRND[S], RaysWay liked this post
    Thanks WaxAddict thanked for this post

  2. #2
    WaxAddict's Avatar
    Join Date
    May 2014
    Posts
    1,511
    Post Thanks / Like

    Re: 3D AAT 502 Finishing Polish Replaces HD Adapt as the Ultimate 1 Step!!

    Great news! Great post. Great, if not incorrectly identified, car.

    I took the plunge and learned to use Adapt after a few misfires. I was hooked. I`m glad there`s a substitute now.
    Likes David Fermani liked this post
    Thanks David Fermani thanked for this post

  3. #3
    PRND[S]'s Avatar
    Join Date
    Apr 2016
    Location
    SoCal
    Posts
    315
    Post Thanks / Like

    Re: 3D AAT 502 Finishing Polish Replaces HD Adapt as the Ultimate 1 Step!!

    Very impressive results for a one-step.
    Likes David Fermani liked this post
    Thanks David Fermani thanked for this post

  4. #4
    Forza Auto Salon David Fermani's Avatar
    Join Date
    Aug 2004
    Location
    Troy, MI
    Posts
    12,534
    Post Thanks / Like

    Re: 3D AAT 502 Finishing Polish Replaces HD Adapt as the Ultimate 1 Step!!

    Quote Originally Posted by `PRND[S
    ;2085119`]Very impressive results for a one-step.
    Thank you!

    Quote Originally Posted by WaxAddict View Post
    Great news! Great post. Great, if not incorrectly identified, car.

    I took the plunge and learned to use Adapt after a few misfires. I was hooked. I`m glad there`s a substitute now.
    Thanks and thanks for pointing out that error. I`ve been doing back to back RS`s (2`s & 3`s especially) that I can`t think straight!!
    Metro Detroit`s leader in cleaning, preserving & perfecting fine automobiles!

  5. #5
    ShaneB's Avatar
    Join Date
    Jan 2013
    Location
    South Lyon, MI
    Posts
    1,464
    Post Thanks / Like

    Re: 3D AAT 502 Finishing Polish Replaces HD Adapt as the Ultimate 1 Step!!

    Agree. 502 is an amazing product

  6. #6
    donbeezy's Avatar
    Join Date
    Feb 2015
    Location
    Nederland, TX
    Posts
    1,533
    Post Thanks / Like

    Re: 3D AAT 502 Finishing Polish Replaces HD Adapt as the Ultimate 1 Step!!

    how do we know if we are getting the old 502 or the new 502? are bottles/labels different?

    edit: never mind, i thought it said reformulated 502 but it just says newly developed

  7. #7
    Autopia Specialist RaysWay's Avatar
    Join Date
    Jan 2014
    Posts
    4,832
    Post Thanks / Like

    Re: 3D AAT 502 Finishing Polish Replaces HD Adapt as the Ultimate 1 Step!!

    < Proud member of the "AAT Fan Club"

    Thanks for reminding me....time to buy a fresh bottle.

  8. #8
    JustJesus's Avatar
    Join Date
    Sep 2014
    Location
    So Cal
    Posts
    2,534
    Post Thanks / Like

    Re: 3D AAT 502 Finishing Polish Replaces HD Adapt as the Ultimate 1 Step!!

    If the 502 is replacing HD Adapt, will the new 505 be replacing HD Speed?

  9. #9
    AspiringProductSpecialist Angus's Avatar
    Join Date
    Mar 2014
    Location
    SE PA
    Posts
    3,604
    Post Thanks / Like

    Re: 3D AAT 502 Finishing Polish Replaces HD Adapt as the Ultimate 1 Step!!

    Quote Originally Posted by JustJesus View Post
    If the 502 is replacing HD Adapt, will the new 505 be replacing HD Speed?
    From Nick`s post over on AGO, it kinda seems that way:

    3D AAT 505 Correction Glaze (Like SPEED, but BETTER!)
    Thanks JustJesus thanked for this post

  10. #10
    PRND[S]'s Avatar
    Join Date
    Apr 2016
    Location
    SoCal
    Posts
    315
    Post Thanks / Like

    Re: 3D AAT 502 Finishing Polish Replaces HD Adapt as the Ultimate 1 Step!!

    Interesting, I hadn`t seen that. I`ve got SPEED and it has been fantastic -- super-easy to work with and produces great results. It seems hard to improve on. Now I have to find a way to use up what`s left of my 32-oz bottle...

  11. #11
    spoocobra's Avatar
    Join Date
    Feb 2014
    Posts
    73
    Post Thanks / Like

    Re: 3D AAT 502 Finishing Polish Replaces HD Adapt as the Ultimate 1 Step!!

    Well guess I`ll need to find a vehicle to finish off my adapt and speed to make room for the these 502 and 505 lol great looking results David.
    Likes David Fermani liked this post
    Thanks David Fermani thanked for this post

  12. #12
    Forza Auto Salon David Fermani's Avatar
    Join Date
    Aug 2004
    Location
    Troy, MI
    Posts
    12,534
    Post Thanks / Like

    Re: 3D AAT 502 Finishing Polish Replaces HD Adapt as the Ultimate 1 Step!!

    Quote Originally Posted by JustJesus View Post
    If the 502 is replacing HD Adapt, will the new 505 be replacing HD Speed?
    Good question, but I don`t foresee that happening (I won`t hold my breathe though). Speed & 505 are pretty different.
    Metro Detroit`s leader in cleaning, preserving & perfecting fine automobiles!

  13. #13
    House of Wax's Avatar
    Join Date
    Nov 2004
    Location
    Roscoe, IL
    Posts
    3,521
    Post Thanks / Like

    Re: 3D AAT 502 Finishing Polish Replaces HD Adapt as the Ultimate 1 Step!!

    Good to see a product follow up to replace it. I was definitely a fan of Adapt

  14. #14
    Alvin_pad's Avatar
    Join Date
    Jan 2016
    Location
    KW / Cambridge
    Posts
    40
    Post Thanks / Like

    Re: 3D AAT 502 Finishing Polish Replaces HD Adapt as the Ultimate 1 Step!!

    Very impressive and which you using the pad?


    Sent from my iPhone using Tapatalk

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Car Paint restoration step #3 : Meguiars ultimate polish review
    By alfierenadhie in forum Auto Detailing Videos
    Replies: 2
    Last Post: 08-31-2016, 10:32 AM
  2. S5 1 step with Adapt
    By steve1972 in forum 3D / High Definition Car Care
    Replies: 16
    Last Post: 01-25-2015, 03:42 PM
  3. Replies: 7
    Last Post: 05-13-2014, 07:29 AM
  4. Cut/Polish/finishing in one step with Rotary
    By orion613719 in forum Machine Polishing & Sanding
    Replies: 11
    Last Post: 08-12-2009, 12:46 PM
  5. Meguiars #205 - The Ultimate Finishing Polish?
    By imported_Dave KG in forum Machine Polishing & Sanding
    Replies: 24
    Last Post: 06-25-2009, 10:25 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •