Just placed my order!! Few questions

**PrideAutoDetail** · 12-30-2015, 11:07 PM

I have just placed an order for HD cut, polish, adapt, and speed. I am extremely excited to try these polishes out. They should be there on the 5th of January and I keep checking the tracking like madman. I am looking for the combo of easy to use, adaptability, RESULT, and cost for my business.All the research I have done on this product line has been good so I can`t wait to get my hands on the order.

Any tips and experience on these products will help me out. I own a GG da 6 inch and the smaller GG 3 inch. As well as hex logic foam pads of all colors.

**House of Wax** · 12-30-2015, 11:25 PM

HD is one of, if not my favorite product line. It`s super easy to work with. My only real tip is less is more. I usually start out with 4 or 5 pea size drops on my pad and after that it`s about 3 at a time. You`re gonna love it

**RaysWay** · 12-31-2015, 12:23 AM

If you`re using the 6 inch backing plate on the gg6, try switching to a 5 inch bp with 5.5 inch pads. Most of us prefer the 5 inch setup. Buff and Shine pads are a must try, especially for a pro. Or the new thin pads from Meguiars or Griots are great too.

**jrock645** · 12-31-2015, 12:25 AM

Yep, these are my favorite polishes so far. So easy to work with its stupid. Also, a little goes a long way so you get a lot for what you pay.

**ShaneB** · 12-31-2015, 12:30 AM

HD speed is amazing. I get awesome results with it in as little as 3 section passes. And works GREAT in direct sunlight. The other products, not so much. I wouldn`t try anything but speed out in sunlight, they simply just don`t work well and are a pain to wipe off

**jrock645** · 12-31-2015, 12:32 AM

Originally Posted by ShaneB

HD speed is amazing. I get awesome results with it in as little as 3 section passes. And works GREAT in direct sunlight. The other products, not so much. I wouldn`t try anything but speed out in sunlight, they simply just don`t work well and are a pain to wipe off

Whats your go to polish in the sun and heat?

**pwaug** · 12-31-2015, 10:04 AM

As mentioned above "less is more" with HD Polishes and no pad priming is needed. Also, my GG6 with a 5" backing plate and 5.5" FLAT B&S pads has handled anything I`ve thrown at it. You`ll find the HD line very user friendly -- long working time, easy removal and little to no dust(unless you use too much product).

**EzyBrzy** · 12-31-2015, 11:17 AM

HD Speed is a pleasure to work with. I can do the whole car then buff off with ease.

HD Cut is nice and also finishes well. Not much dusting.

**nothingface5384** · 12-31-2015, 12:46 PM

I`ve initialy tried adapt and loved it
3d speed is also a great
Get poxy also!

**Migue** · 01-01-2016, 12:30 AM

HD Speed is an awesome product. Loooong work time,very easy to wipe off and gives great results. Do your test spot on vehicle, and once you got that dialed in just keep polishing around the whole vehicle without wiping Speed off and it`ll still come off easily once you`re done with the whole car.

HD Polish - good work time, very little to no dusting, a little goes a long way without pad priming, easy to wipe off.
HD Cut- good work time, may dry up quicker than Polish, but it reactivates very nicely with a spritz or two of water on your panel as you`re working the product. Minor dusting to where it`s been very tolerable for me so far.

HD Dress is a pretty nice and reasonably priced product as well, it is my current go to for exterior trim.

Have fun !