New HD Online Store is now Live!

**David Fermani** · 04-04-2012, 09:38 PM

Originally Posted by C. Charles Hahn

How aggressive would you say the HD Polish is cut-wise? On par with 106FA? 85RD? Something else entirely?

Not very aggressive at all from what I can tell although it`s main duty is for final finishing. I`d rather use UNO V4 with a lighter pad then HD Polish with an agressive one for light 1 step correction. Although HD Speed may even be within that range as well.

106/85 are totally different I`d say and I`ve actually had good correction using them on very soft clears. (as well as finishing)

**C. Charles Hahn** · 04-04-2012, 10:28 PM

Originally Posted by David Fermani

Not very aggressive at all from what I can tell although it`s main duty is for final finishing. I`d rather use UNO V4 with a lighter pad then HD Polish with an agressive one for light 1 step correction. Although HD Speed may even be within that range as well.

106/85 are totally different I`d say and I`ve actually had good correction using them on very soft clears. (as well as finishing)

That`s exactly why I asked; I can use 106/85 in certain situations to do minor correction and finish down, so I was thinking perhaps the HD Polish would be capable of similar tasks but from what you`re describing, that`s probably not the case.

Even if HD Speed can do it, the fact that it`s an AIO may make it less desirable depending on the LSP I plan to use after it. I understand all of this was designed to be used as a complete "system" of UNO->HDP->Poxy/NS but I think we all realize that`s not always how it`s going to be used.

**Chickenhala** · 04-05-2012, 12:52 AM

Is there a dealer in Honolulu, Hawaii

**VW 91** · 04-05-2012, 05:16 AM

Originally Posted by David Fermani

Yes, you could call it a reformulation, but the product went through some pretty drastic changes in light. It`s not V5, it`s UNO Advanced Cut. And that`s how it is different....It cuts alot more then any other UNO versions. UNO was created to be 1 product that would be able to cut, polish and finish down. This is a difficult task to do on all paint scenarios at times depending on climate, paint type and or course user. Many gave input that it needed more cut. Some mentioned it didn`t finish as good as it could. What Mel did was instead of focusing on 1 product that can do everything, he incorporated 2 very different ones. He also updated the pad format and also the workflow for product/pad priming to one that he felt would be a winning comradery for the entire line. So what you now get is a product that cuts much better and another that finishing better too. Oh, and still with no dust. I think you`re going to like it.

From my limited use with UNO V4 it seemed to cut somewhere between M105 and D300. Even if it cuts just as well or a little bit worse than M105 I can see it being my go to compound. The dust from M105 was always such a pain, I can`t wait to try the new UNO!

**loodi** · 04-05-2012, 07:14 AM

wanted to place an order but came across a problem with the shipping estimator...

Total Items: 19 Weight: 11.7lbs Amount: $215.81 to Istra, Croatia...aaaaaand.... nothing.

im not getting over frustrated with it cause it has always been a problem with ordering something to my place from across the ocean, so usually im forced to give up the shopping. but i dont want to give up on this. i have high expectations on the new advanced Uno and Polish and am sure it wont dissapoint me so i really dont want to give up on this.

can you please help me?

how do i know how much is the shipment gonna cost me? i need to know in advance cause if the price gets too high i would look for an alternative adress of some of my friends over europe... or something... idk...

**Ben@3D** · 04-05-2012, 01:12 PM

Originally Posted by loodi

wanted to place an order but came across a problem with the shipping estimator...

Total Items: 19 Weight: 11.7lbs Amount: $215.81 to Istra, Croatia...aaaaaand.... nothing.

im not getting over frustrated with it cause it has always been a problem with ordering something to my place from across the ocean, so usually im forced to give up the shopping. but i dont want to give up on this. i have high expectations on the new advanced Uno and Polish and am sure it wont dissapoint me so i really dont want to give up on this.

can you please help me?

how do i know how much is the shipment gonna cost me? i need to know in advance cause if the price gets too high i would look for an alternative adress of some of my friends over europe... or something... idk...

Will look into the international shipping pricing. That seems a bit excessive. We only want to charge the actually price.

Do you have a zip code over in Croatia?

Often you can get the best rate by pm`ing me your order and address and using paypal. That way I can get you USPS Flat Rate box pricing. The cart is not smart enough for flat rate pricing and does standard Priority Rate.