Lets really talk about HD Nitro Seal From 3D Products

**Alfisti** · 08-14-2011, 07:20 AM

Originally Posted by ironman1982

Permanent coatings are also a sacrificial layer. i.e. Not clear coat

See my previous post.

And respraying your entire car is very much cost prohibitive and shouldn`t even be in this discussion in my own opinion. These permanent coatings vary in cost from $40 to $60 and will do 2-4 vehicles depending on the product and the size of the vehicle. Not to mention the resistance these coatings have to solvents/harsh soaps and their improved scratch resistance etc. Granted the pictures and videos of NS look to be impressive. I would like to at least know why I should choose this over the other alternatives. There will be some who will buy this just out of curiosity or because it`s the next flavor of the month. I want to be convinced to spend my hard earned money. I will use the coating I have in my house to coat my GF`s car and her sister`s car instead and get this is it seems to be worth it. Just my 2 cents. Take it or leave it.

So far, everything I`ve used from 3D have pretty much been best-in-class. I`m confident NS will be no different.

**mongo** · 08-24-2011, 01:12 PM

Barry at the 7:30 mark of the vid what applicator did you use with nitro seal and how can I get one.

**Fresh Look** · 08-26-2011, 01:42 AM

Originally Posted by mongo

Barry at the 7:30 mark of the vid what applicator did you use with nitro seal and how can I get one.

I think it will be sold September 1st.

**shirtman** · 09-01-2011, 02:44 PM

The applicator is included with the Nitro.

Jeff

**Rei86** · 09-01-2011, 04:27 PM

9/1/2011 no product up.

**autoconcierge** · 09-02-2011, 08:13 AM

Just recieved my "Care package from Ben".......... I have the perfect car to try this on(Alex @ Sharkwerks has a all electric Toyota Rav 4 as a new daily driver and it will be a good test bed for me on the Nitro Seal.

**wascallyrabbit** · 09-02-2011, 09:46 AM

what color is it?

**MarcHarris** · 09-07-2011, 02:40 AM

Originally Posted by Auto Concierge

Just recieved my "Care package from Ben".......... I have the perfect car to try this on(Alex @ Sharkwerks has a all electric Toyota Rav 4 as a new daily driver and it will be a good test bed for me on the Nitro Seal.

Please let me know what you think Bob.

**Thomas Dekany** · 09-07-2011, 02:58 AM

Just seeing how it looks on my car, I am also waiting on Bob`s thoughts.

Originally Posted by MarcHarris

Please let me know what you think Bob.

**Nopstnz8** · 09-07-2011, 05:57 AM

Can this be used on top of KSG or topped with 845?

**autoconcierge** · 09-07-2011, 07:13 AM

Car is scheduled in and I spoke with Barry on the application of the product the other day, have also read all the other threads on this product from Dave and Thomas so I think I should have no issues using the new gear. Thinking to also put it on my "Beater/commute car that I have which is a 05 Nissan Sentra(Silver) which the wife takes to commute in and sits outside 24/7 which would also be a great test bed for protection abilities.

One thing I have not seen mentioned is the removal of the product, as mechanical friction(Compouding) is required for a product like AQuartz/CQuartz to remove the coating and was wondering what the 3D 3 amigos(Barry/Dave/Thomas) think or maybe Tunch can chime in on this possibly. Will have some thoughts by next week or so.

**Barry Theal** · 09-07-2011, 07:27 AM

Originally Posted by Auto Concierge

Car is scheduled in and I spoke with Barry on the application of the product the other day, have also read all the other threads on this product from Dave and Thomas so I think I should have no issues using the new gear. Thinking to also put it on my "Beater/commute car that I have which is a 05 Nissan Sentra(Silver) which the wife takes to commute in and sits outside 24/7 which would also be a great test bed for protection abilities.

One thing I have not seen mentioned is the removal of the product, as mechanical friction(Compouding) is required for a product like AQuartz/CQuartz to remove the coating and was wondering what the 3D 3 amigos(Barry/Dave/Thomas) think or maybe Tunch can chime in on this possibly. Will have some thoughts by next week or so.

Hey I was gonna answer that for ya until I read the three amigo`s part! lol Its not like we have our own form of latin or something. I can see it now Anew show show called " The Bing and the Bob show! lol It would be like Batman and Robin! I could see it in 3D film words coming at you like "Certified Tightness" "with the quickness" . lol I`m really feeling this now.

**Barry Theal** · 09-07-2011, 07:30 AM

On a side note Bob, I would use laquer thinner if that helps:werd:

**Thomas Dekany** · 09-07-2011, 10:21 AM

Barry, that was a real funny post. Really really funny.

As far as removal of NS - Uno worked just fine after a day or so.

**Thomas Dekany** · 09-07-2011, 10:27 AM

1 - I`d say no - sealants don`t usually stick to other sealants.

2 - Why would you want to? Ruin the look? On paper, NS blows 845 out of the water if it indeed lasted 12-18 months.

Originally Posted by Rx8 Fanatic

Can this be used on top of KSG or topped with 845?