You`d want a cutting and a finishing pad at least, but seeing that you have a black 911, a white pad should be used in between as well.
You`d want a cutting and a finishing pad at least, but seeing that you have a black 911, a white pad should be used in between as well.
Originally Posted by Ben@Autopia
Opps. Forgot it was a long weekend down there!
I just received my Uno & Poxy last week, I am not sure I have V3. it doesn`t have the 3 after the O and there is not date that I can find.
Originally Posted by tdekany
Thank you. Any brands better, like LCC? I am also concerned that the GC might be to large (6"). Should I reconsider machines? How about I just bring my car to you..LOL
Originally Posted by The Count
Yes, I did it myself and I had no problems. Make sure you work the HDuno with cutting pad, polishing pad and finishing pad, I never go over 1500 rpm and then I finish up with a pc and HDpoxy. I also like the HDuno more than 105 because it does not powder.
The only cutting pads "I" don`t care for are the ccs pads. Otherwise LC or Meg`s pads are all fine. You can get a 5" plate for the GG pc. Where are you?
Originally Posted by BLKonBLK911
Originally Posted by tdekany
Is it because of the foam-type or the dimples?
dimples.......
Originally Posted by Alfisti
Originally Posted by tdekany
tdekany,
Just to confirm you use HD Uno with all 3 pads then Sealant or wax?
It all depends. On a black car the extra step is beneficial. Afterwards, you can use your wax or sealant.
If that doesn`t work, I can always do it for you. How old is it?
Nice thread Barry :up ... Out here in Vegas, i get alot of light scratches from customers that wipe their car down with dusters.. using HD Uno with the orange pad followed by the blue on my pc then add the poxy after makes my job very easy.
DeWalter, Are you coming to the Hall-of-Fame detailing seminar from Vegas? I will be there... I think it will be a great show.
Originally Posted by Thewaxer
There`s a Hall of Fame for detailers? Or a seminar? Link? Info?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks